F3-CFM-MIB
98 objects
This module defines the CFM (8021AG) Extension MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.1.12.13 | Identityf3CfmMIB | This module defines the CFM (8021AG) Extension MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. | ||
| 1.3.6.1.4.1.2544.1.12.13.1 | NodecfmExtSvc | |||
| 1.3.6.1.4.1.2544.1.12.13.1.1 | NodecfmExtSvcObjects | |||
| 1.3.6.1.4.1.2544.1.12.13.1.1.1 | NodecfmExtScalars | |||
| 1.3.6.1.4.1.2544.1.12.13.1.1.1.1 | ScalarcfmEthType | read-only | current | This object provides the system level Ethernet type for CFM. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.1.2 | ScalarcfmMacAddress | read-only | current | This object provides the system level Mac address for CFM. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.1.3 | ScalarslmMulticastMacAddress | read-write | current | This object can be used to configure the Synthetic Loss Measurement(SLM) Multicast MAC Address. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.1.4 | ScalarslmOpcode | read-write | current | This object can be used to configure the Operation Code for the Synthetic Loss Measurement(SLM) message. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.1.5 | ScalarslrOpcode | read-write | current | This object can be used to configure the Operation Code for the Synthetic Loss Response(SLR) message. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.1.6 | ScalarcfmSignalFailTriggers | read-write | current | This object can be used to configure the list of defects which constitute Signal Fail condition. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2 | TablecfmMepTable | not-accessible | current | Additional MEP configuration such as Y.1731 configuration. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1 | RowcfmMepEntry | not-accessible | current | A list of additional MEP parameters such the Y.1731 parameters. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.1 | ColumncfmMepAdminState | read-write | current | This object represents the Administrative State of the CFM MEPs. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.2 | ColumncfmMepAisGenTriggerTypes | read-create | current | A bit mask which indicates all the defects that result in triggering an AIS for the higher level MEP or transmission of ETH-AIS. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.3 | ColumncfmMepAisClientMdLevel | read-create | current | AIS Client MD level which is the MD level used to identify any higher level local MEPs for which AIS defect needs to be set or MD level of the ETH-AIS frame ge… |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.4 | ColumncfmMepAisInterval | read-create | current | ETH-AIS frame transmission interval if decision is made to transmit the ETH-AIS frame. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.5 | ColumncfmMepAisGenEnabled | read-create | current | This flag enables/disables propagation of ETH-AIS to client MD levels. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.6 | ColumncfmMepAisPriority | read-create | current | This VLAN priority of the ETH-AIS frame. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.7 | ColumncfmMepLmTxCountAllPriosEnabled | read-create | current | This attribute is used when Y.1731 probes are created and LMM frames are transmitted. As per Y.1731, loss measurement should be done per priority class. The im… |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.8 | ColumncfmMepLmRxCountAllPriosEnabled | read-create | current | This attribute is used when Y.1731 probes are created and LMR frames are transmitted. As per Y.1731, loss measurement should be done per priority class. The im… |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.9 | ColumncfmMepLmDualEndedCountAllPriosEnabled | read-create | current | This attribute is used when Y.1731 probes are created and CCM frames are transmitted with loss measurement counts. As per Y.1731, loss measurement should be do… |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.10 | ColumncfmMepLmCountInProfileEnabled | read-create | current | As per the Y.1731 data frames counted for loss measurement shall be in-profile (green) data frames. As an added value, this flag is provided for the device to … |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.11 | ColumncfmMepLmTxPriority | read-create | current | This attribute is used if cfmMepLmTxCountAllPrios is false. This attribute serves three purposes: - It is the VLAN priority of the LMM. - Data frames transmitt… |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.12 | ColumncfmMepDmPriority | read-create | current | This attribute specifies the DMM frame VLAN priority. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.13 | ColumncfmMepRxCCMs | read-only | current | This provides the total number of received CCMs on the MEP. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.14 | ColumncfmMepErrCCMs | read-only | current | This provides the total number of errored CCMs on the MEP. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.15 | ColumncfmMepLLFTriggerTypes | read-create | current | This bit mask indicates the CFM triggers that result in link loss forwarding. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.16 | ColumncfmMepDefects | read-only | current | This bit mask indicates defects that not defined in standard 802.1ag MIB such as AIS defect. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.17 | ColumncfmMepTagEtherType | read-write | current | This object allows management of Ether Type for MEP VLAN Tag for the MEPs. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.18 | ColumncfmMepStatsAction | read-write | current | Allows the Manager to clear the CFM level statistics : cfmMepRxCCMs, cfmMepErrCCMs. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.19 | ColumncfmMepLbmInterval | read-create | current | ETH-LBM frame transmission interval. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.20 | ColumncfmMepOperationalState | read-only | current | This object represents the Operational State of the CFM MEP. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.21 | ColumncfmMepSecondaryState | read-only | current | This object represents the Secondary State of the CFM MEP. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.22 | ColumncfmMepSlmEnabled | read-write | current | This bit mask indicates the whether SLM is enabled per each COS. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.23 | ColumncfmMepAssociatedObject | read-write | current | This object represents the associated port, it could be port, flow or flow point. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.3 | TablecfmAccPortQosShaperTable | not-accessible | current | A list of configurable profile entries for CFM QoS Shapers for Access Port. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.3.1 | RowcfmAccPortQosShaperEntry | not-accessible | current | A list of parameters that set up the CFM QoS Queue profiles. This shaper is created automatically when the first Down MEP is created on a Access Port. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.3.1.1 | ColumncfmAccPortQosShaperIndex | not-accessible | current | A unique index associated with the type of Access Port Based Shaper. Index 1 refers to the Shaper associated with PORT-based Down MEPs, Index 2 refers to the S… |
| 1.3.6.1.4.1.2544.1.12.13.1.1.3.1.2 | ColumncfmAccPortQosShaperCIR | read-write | current | This object identifies the queue CIR. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.3.1.3 | ColumncfmAccPortQosShaperBufSize | read-write | current | This object identifies the queue buffer size. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.3.1.4 | ColumncfmAccPortQosShaperAdminState | read-write | current | This object allows the management of the Shaper Administrative State. Only 'in-service' and 'management' states are allowed. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.4 | TablecfmNetPortQosShaperTable | not-accessible | current | A list of configurable profile entries for CFM QoS Shapers for Network Port. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.4.1 | RowcfmNetPortQosShaperEntry | not-accessible | current | A list of parameters that set up the CFM QoS Queue profiles. This shaper is created automatically when the first Down MEP is created on a Network Port. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.4.1.1 | ColumncfmNetPortQosShaperTypeIndex | not-accessible | current | A unique index associated with the type of Network Port Based Shaper. Index 1 refers to the Shaper associated with PORT-based Down MEPs, Index 2 refers to the … |
| 1.3.6.1.4.1.2544.1.12.13.1.1.4.1.2 | ColumncfmNetPortQosShaperCIR | read-write | current | This object identifies the queue CIR. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.4.1.3 | ColumncfmNetPortQosShaperBufSize | read-write | current | This object identifies the queue buffer size. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.4.1.4 | ColumncfmNetPortQosShaperAdminState | read-write | current | This object allows the management of the Shaper Administrative State. Only 'in-service' and 'management' states are allowed. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.5 | TablecfmServerMepTable | not-accessible | current | Server MEP management table. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.5.1 | RowcfmServerMepEntry | not-accessible | current | This allows management of Server MEPs. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.1 | ColumncfmServerMepIndex | read-create | current | The integer index value corresponding to a Server MEP. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.2 | ColumncfmServerMepAssociatedPort | read-create | current | This is the port on which the CFM Server MEP is created. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.3 | ColumncfmServerMepAisClientMdLevel | read-create | current | AIS Client MD level which is the MD level used to identify any higher level local MEPs for which AIS defect needs to be set or MD level of the ETH-AIS frame ge… |
| 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.4 | ColumncfmServerMepAisInterval | read-create | current | ETH-AIS frame transmission interval if decision is made to transmit the ETH-AIS frame. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.5 | ColumncfmServerMepAisGenEnabled | read-create | current | This flag enables/disables propagation of ETH-AIS to client MD levels. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.6 | ColumncfmServerMepAisPriority | read-create | current | This VLAN priority of the ETH-AIS frame. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.7 | ColumncfmServerMepStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.8 | ColumncfmServerMepRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.9 | ColumncfmServerMepAdminState | read-write | current | This object represents the Administrative State of the Server MEP. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.10 | ColumncfmServerMepOperationalState | read-only | current | This object represents the Operational State of the Server MEP. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.11 | ColumncfmServerMepSecondaryState | read-only | current | This object represents the Secondary State of the CFM MEP. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.6 | TablecfmDownMEPQosShaperTable | not-accessible | current | A list of configurable profile entries for CFM QoS Shapers for down MEPs. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.6.1 | RowcfmDownMEPQosShaperEntry | not-accessible | current | A list of parameters that set up the CFM QoS Queue profiles. This shaper is created automatically when the first Down MEP is created on a Port. Note, this queu… |
| 1.3.6.1.4.1.2544.1.12.13.1.1.6.1.1 | ColumncfmDownMEPQosShaperIndex | not-accessible | current | A unique index associated with the Shaper for Down MEPs. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.6.1.2 | ColumncfmDownMEPQosShaperType | read-only | current | Type of Shaper for Down MEPs. 1 refers to the Shaper associated with Down MEPs(for both port based and VID based) fot Transimit direction, 2 refers to the Shap… |
| 1.3.6.1.4.1.2544.1.12.13.1.1.6.1.3 | ColumncfmDownMEPQosShaperCIR | read-write | current | This object identifies the queue CIR. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.6.1.4 | ColumncfmDownMEPQosShaperProfile | read-write | current | This object identifies the OID of cmQosQueueProfileIndex in the cmQosQueueProfileTable. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.6.1.5 | ColumncfmDownMEPQosShaperAdminState | read-write | current | This object allows the management of the Shaper Administrative State. Only 'in-service' and 'management' states are allowed. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.7 | TablecfmMepExcludedMepListTable | not-accessible | current | A list of configurable profile entries for CFM excluded mep list. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.7.1 | RowcfmMepExcludedMepListEntry | not-accessible | current | Excluded Remote Mep List for local Mep, not expected to receive OAM from these MEPs. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.7.1.1 | ColumncfmMepExcludedMepListIdentifier | not-accessible | current | A unique index associated with CfmMepExcludedMepListEntry. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.7.1.2 | ColumncfmMepExcludedMepListRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.13.1.1.8 | TablecfmMepLbrTable | not-accessible | current | A list of configurable profile entries for MepLbr. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.8.1 | RowcfmMepLbrEntry | not-accessible | current | MEP LBR statistic table. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.8.1.1 | ColumncfmMepLbrMacAddress | read-only | current | Source Mac Address of LBR. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.8.1.2 | ColumncfmMepLbrMepId | read-only | current | Remote MEP ID. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.8.1.3 | ColumncfmMepLbrInOrder | read-only | current | Total valid in-order LBR received. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.8.1.4 | ColumncfmMepLbrOutOfOder | read-only | current | Total valid out of order LBR received. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.9 | TablecfmMaCompTable | not-accessible | current | A additional list of MA components. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.9.1 | RowcfmMaCompEntry | not-accessible | current | A list of additional maCompEntry. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.9.1.1 | ColumncfmMaCompIndex | read-only | current | This object represents the maComp number value. |
| 1.3.6.1.4.1.2544.1.12.13.1.1.9.1.2 | ColumncfmMaCompEntity | read-create | current | This object represents the maComp entity, it is should be port or flow's oid. |
| 1.3.6.1.4.1.2544.1.12.13.1.2 | NodecfmExtSvcConformance | |||
| 1.3.6.1.4.1.2544.1.12.13.1.2.1 | NodecfmExtSvcCompliances | |||
| 1.3.6.1.4.1.2544.1.12.13.1.2.1.1 | CompliancecfmExtCompliance | current | Describes the requirements for conformance to the CFM Extensions. | |
| 1.3.6.1.4.1.2544.1.12.13.1.2.2 | NodecfmExtSvcGroups | |||
| 1.3.6.1.4.1.2544.1.12.13.1.2.2.1 | GroupcfmExtGroup | deprecated | ******************THIS OBJECT GROUP IS NOW DEPRECATED ****************** A collection of objects used to identify CFM extension implementation compliance. | |
| 1.3.6.1.4.1.2544.1.12.13.1.2.2.2 | GroupcfmGenGroup | current | A collection of objects used to identify CFM extension implementation compliance. | |
| 1.3.6.1.4.1.2544.1.12.13.1.2.2.3 | GroupcfmMepGroup | current | A collection of objects used to identify additional CFM MEP functions. | |
| 1.3.6.1.4.1.2544.1.12.13.1.2.2.4 | GroupcfmPortShaperGroup | current | A collection of objects used to identify CFM Port Shaper functionality. | |
| 1.3.6.1.4.1.2544.1.12.13.1.2.2.5 | GroupcfmServerMepGroup | current | A collection of objects used to identify CFM Server MEP functionality. | |
| 1.3.6.1.4.1.2544.1.12.13.1.2.2.6 | GroupcfmMaCompGroup | current | A collection of additional objects used to show maComp. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CfmAisGenTriggerTypes | BITS { bAisDefRemoteCCM(0), bAisDefErrorCCM(1), bAisDefXconCCM(2), bAisDefAis(3) } | current | Bit Mask that specifies all the defects that can trigger AIS to be generated. |
| CfmAisInterval | INTEGER { aisInterval1sec(1), aisInterval1min(2) } | current | AIS interval which is the frequency of ETH-AIS frame generation. Note the values of the 1 second and 1 minute integers which are aligned with the values defined for the AIS interval for AIS PDU in Y.1731. |
| CfmLLFTriggerTypes | BITS { bAis(0), bCcmIfStatusTlv(1), bRemoteCCM(2), bRDI(3) } | current | Bit Mask that specifies all the conditions that trigger a link loss forwarding. |
| CfmLmmDmmInterval | INTEGER { interval10msec(1), interval100msec(2), interval1sec(3), interval10sec(4), interval1min(5) } | current | Y.1731 Loss or delay measurement frame transmission interval. |
| CfmMepDefects | BITS { bDefAIS(0) } | current | A MEP can detect and report a number of defects such as RDI, MACStatus, RMEP CCM, Error CCM, Xconn CCM. These are are defined in Dot1agCfmMepDefects in standard 802.1ag MIB. Y.1731 adds additional defects such as AIS de… |
| CfmSignalFailTriggers | BITS { rdiCcm(0), remoteCcm(1), erroredCcm(2), xconCcm(3), ais(4) } | current | Bit Mask that specifies all the conditions that trigger Signal Fail. |
| CfmSlmEnabledTypes | BITS { cos0(0), cos1(1), cos2(2), cos3(3), cos4(4), cos5(5), cos6(6), cos7(7) } | current | Bit Mask that specifies all the priorities. |