RAD-OamCfm-MIB
459 objects
OAM CFM MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.3.1.6.1.3 | IdentityethIfOamCfm | OAM CFM MIB. | ||
| 1.3.6.1.4.1.164.3.1.6.1.3.0 | NodeethIfOamCfmEvents | |||
| 1.3.6.1.4.1.164.3.1.6.1.3.0.1 | NotificationethOamCfmDefectCondition | current | This trap indicates that a MEP has a persistent defect condition. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.4 | NotificationoamCfmMepAis | current | This trap indicates AIS on MEP. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.5 | NotificationoamCfmMepLck | current | This trap indicates LCK on MEP. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.6 | NotificationoamCfmMepMismatch | current | This trap indicates Mismatch. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.7 | NotificationoamCfmRmepLoc | current | This trap indicates Remote MEP LOC. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.8 | NotificationoamCfmRmepRdi | current | This trap indicates Remote MEP RDI. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.9 | NotificationoamCfmDestNeDelayTca | current | Delay threshold crossing alert. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.10 | NotificationoamCfmDestNeDelayTcaOff | current | This trap indicates that the Delay is in the permitted range. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.11 | NotificationoamCfmDestNeDelayVarTca | current | Delay variance threshold crossing alert. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.12 | NotificationoamCfmDestNeDelayVarTcaOff | current | This trap indicates that the Delay variance is in the permitted range. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.13 | NotificationoamCfmDestNeLossRatioTca | current | Loss ratio threshold crossing alert. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.14 | NotificationoamCfmDestNeLossRatioTcaOff | current | This trap indicates that the Loss ratio is in permitted range. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.15 | NotificationoamCfmDestNeLossRatioTcaFe | current | Loss ratio is in permitted range at the far-end. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.16 | NotificationoamCfmDestNeLossRatioTcaFeOff | current | Loss ratio threshold crossing alert at the far-end. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.17 | NotificationoamCfmDestNeUnavailRatioTca | current | Unavailable ratio threshold crossing alert. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.18 | NotificationoamCfmDestNeUnavailRatioTcaOff | current | Unavailable ratio is in the permitted range. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.19 | NotificationoamCfmDestNeUnavailRatioTcaFe | current | Unavailable ratio threshold crossing alert at the far-end. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.20 | NotificationoamCfmDestNeUnavailRatioTcaFeOff | current | This trap indicates that the Unavailable ratio is in the permitted range at far-end. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.21 | NotificationoamCfmMepDefXconCCM | current | This trap indicates the MEP has received at least one CCM from either another MAID or lower MD level. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.22 | NotificationoamCfmMepDefErrorCCM | current | This trap indicates the MEP has received at least one invalid CCM whose CCM interval has not yet timed out. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.23 | NotificationoamCfmRmepDefRemoteCCM | current | This trap indicates Loss Of Continuity (LOC) with a specific RMEP. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.24 | NotificationoamCfmRmepDefRDICCM | current | This trap indicates a specific RMEP has reported the RDI bit in its last CCM. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.25 | NotificationoamCfmRmepDefMACstatus | current | This trap indicates a specific RMEP is either reporting its Interface Status TLV as not isUp(1), or its Port Status TLV as not psUp(2). | |
| 1.3.6.1.4.1.164.3.1.6.1.3.0.26 | NotificationsystemCfmSoamRxPacketDropped | current | This trap indicates received CFM SOAM packets dropped during last interval. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.1 | TableradMepTable | not-accessible | deprecated | MEG End Point (MEP) configuration table associated with Maitenance Entity Group (MEG) End Point. MEP is a short name for an expanded ETH flow point that includ… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1 | RowradMepEntry | not-accessible | deprecated | An entry in the table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.1 | ColumnradOamIdx1 | not-accessible | deprecated | This object may indicate the Bridge Index or Configuration index. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.2 | ColumnradOamEvcIdx | not-accessible | deprecated | This object indicates the Index of the EVC (Ethernet Virtual Circuit) that the MEP is associated to. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.3 | ColumnradMepIdx | not-accessible | deprecated | This object indicates the ID of the MEP being accessed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.4 | ColumnradMepRowStatus | read-create | deprecated | This attribute allows to create/delete a row in this table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.5 | ColumnradMepLocalMepId | read-create | current | This object indicates the local MEP ID. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.6 | ColumnradMepRemoteMepId | read-create | current | This atribute is currently implemneted at radMepCcTable, that supports multicast. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.7 | ColumnradMepOamMode | read-create | current | This object determines the OAM mode of the MEP: disabled - no CC is initiated nor responded initiate - the device initiates and responds to CC react - the devi… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.8 | ColumnradMepContinuityVerMode | read-create | current | This object determines the OAM behavior of the MEP: disabled - no CC is done cc_based - CC is done based on incoming messages lb_based - CC is done based on lo… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.9 | ColumnradMepMeLevel | read-create | current | At any point in a network, ME Level is used to distinguish between OAM signals belonging to different nested MEs. Maintenance Entity Levels are defined as foll… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.10 | ColumnradMepOamDestAddrType | read-create | current | This object determines if the OAM messages are sent to user defined unicast address, or to RAD proprietary multicast address. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.11 | ColumnradMepOamDestMacAddr | read-create | current | This object determines the MAC address that OAM packets are sent to. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.12 | ColumnradMepDefaultPriority | read-create | current | This object defines the priority of the OAM messages sent when no service is defined on EVC. If a service is defined, the OAM messages will get the highest ser… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.13 | ColumnradMepCcStatus | read-only | current | This object indicates the Continuity Check (CC) status. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.14 | ColumnradMepOamProtocol | read-create | current | Determines whether to use proprietary OAM mechanism, or to use the standard (IEEE 802.1ag, ITU-T Y.1731). |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.15 | ColumnradMepMdId | read-create | current | The index of the Maintenance Domain in the radMdTable (radMdIndex). |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.16 | ColumnradMepMaFormat | read-create | current | The type (and thereby format) of the Maintenance Association Name. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.17 | ColumnradMepMaName | read-create | current | The Short Maintenance Association name. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.18 | ColumnradMepSpVlanId | read-create | current | The SP (Service Provider) VLAN used when sending an OAM message. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.19 | ColumnradMepCcInterval | read-create | current | Indicates the interval at which CCMs are sent by a MEP Valid only if radMepOamMode = initiate(4). |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.20 | ColumnradMepTransmitLbmDestMacAddress | read-create | current | The Target MAC Address Field to be transmitted in the Loopback Message: For unicast MAC Address this is the unicast destination MAC address. For multicast MAC … |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.21 | ColumnradMepTransmitLbmDestMepId | read-create | current | The MEPID of another MEP in the same MA to which the LBM is to be sent. This address will be used if the value of radMepTransmitLbmDestIsMepId is yes (3). 802.… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.22 | ColumnradMepTransmitLbmDestIsMepId | read-create | current | yes (3) indicates that MEPID of the target MEP is used for loopback transmission. no (2) indicates that unicast destination MAC address of the target MEP is us… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.23 | ColumnradMepTransmitLbmMassages | read-create | current | The number of Loopback messages to be transmitted. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.24 | ColumnradMepTransmitLbmVlanPriority | read-create | current | The priority to be used in the VLAN tag, if present, in the transmitted frame. The default value is CCM priority. 802.1ag clause 12.14.7.3.2:e |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.25 | ColumnradMepTransmitLbmVlanDropEnable | read-create | current | Drop Enable bit to be used in the VLAN tag, if present, in the transmitted frame. 802.1ag clause 12.14.7.3.2:e |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.26 | ColumnradMepLbrIn | read-only | current | Total number of valid, in-order Loopback Replies received. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.27 | ColumnradMepLbrInOutOfOrder | read-only | current | The total number of valid, out-of-order Loopback Replies received. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.28 | ColumnradMepLbmOut | read-only | current | Total number of Loopback Messages transmitted. |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.29 | ColumnradMepTransmitLtmTargetMacAddress | read-create | current | The Target MAC Address Field to be transmitted in the Link Trace Message: A unicast destination MAC address. This address will be used if the value of radMepTr… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.30 | ColumnradMepTransmitLtmTargetMepId | read-create | current | The MEPID of another MEP in the same MA to which LTM is to be transmitted. This address will be used if the value of radMepTransmitLtmTargetIsMepId is yes (3).… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.31 | ColumnradMepTransmitLtmTargetIsMepId | read-create | current | yes (3) indicates that MEPID of the target MEP is used for Linktrace transmission. no (2) indicates that unicast destination MAC address of the target MEP is u… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.32 | ColumnradMepTransmitLtmTtl | read-create | current | The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 each Linktrace Res… |
| 1.3.6.1.4.1.164.3.1.6.1.3.1.1.33 | ColumnradMepTransmitLtmActivationCmd | read-create | current | Activation command for starting Loop Trace. Set will be always to 'on' value. After operation was finished, Agent will turn the value to 'off'. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2 | NodeethOamService | |||
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1 | TableethOamServiceTable | not-accessible | current | Service configuration table associated with Services running on a MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1 | RowethOamServiceEntry | not-accessible | current | An entry in the table. Indices are as follows: - radOamIdx1 corresponds to MD Id (IEEE8021-CFM-MIB.dot1agCfmMdIndex). - radOamEvcIdx corresponds to MA Id (IEEE… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.1 | ColumnethOamServiceIdx | not-accessible | current | This object indicates the Index of the service being accessed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.2 | ColumnethOamServiceRowStatus | read-create | current | This attribute allows to create/delete a row in this table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.3 | ColumnethOamServicePriority | read-create | current | This object determines the priority of the service. It is sent as P bits in an OAM message originated by this service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.4 | ColumnethOamServicePmEnable | read-create | current | This object determines PM (Performance Monitoring) shall be enabled or not for the service. Setting the object to disable(2) will stop the PM activity of all D… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.5 | ColumnethOamServiceFrameLossRatioThresh | read-create | current | This object determines the Frame Loss ratio threshold in exponent of 1/10. That is, a value of 4 means that the threshold is 1E-4. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.6 | ColumnethOamServiceDelayThresh | read-create | current | This object determines the delay threshold defined for this service, in measurement unit of 0.1 milliseconds (100 x usec). |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.7 | ColumnethOamServiceDelayVarThresh | read-create | current | This object determines the delay-variation threshold defined for this service, in measurement unit of 0.1 milliseconds (100 x usec). |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.8 | ColumnethOamServiceUnavailRatioThresh | read-create | current | This object determines the Unavailability ratio threshold in exponent of 1/10. That is, a value of 4 means that the threshold is 1E-4. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.9 | ColumnethOamServiceTxFrames | read-only | current | Counts the number of frames trnasmitted by since the time the service is up. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.10 | ColumnethOamServiceOverflowTxFrames | read-only | current | The number of times the associated ethOamServiceTxFrames counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.11 | ColumnethOamServiceFarEndFrameLoss | read-only | current | Counts the number of frames lost at the far end since the time the service is up. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.12 | ColumnethOamServiceOverflowFarEndFrameLoss | read-only | current | The number of times the associated ethOamServiceFarEndFrameLoss counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.13 | ColumnethOamServiceFarEndFrameLossRatio | read-only | current | Indicates the ratio of the lost frames at the far end since the time the service is up. The value is the ratio multiplied by 1E10. 0xFFFFFFFF will be returned … |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.14 | ColumnethOamServiceElapsedTime | read-only | current | Indicates the time elapsed in seconds since the time the service is up. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.15 | ColumnethOamServiceUnavailSec | read-only | current | Indicates the number of unavailable seconds since the time the service is up. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.16 | ColumnethOamServiceUnavailRatio | read-only | current | Indicates the ratio of the unavailable seconds since the time the service is up. The value is the ratio multiplied by 1E10. 0xFFFFFFFF will be returned for rat… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.17 | ColumnethOamServiceFramesAboveDelay | read-only | current | Indicates the number of frames arrived with delay greater than the delay threshold. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.18 | ColumnethOamServiceOverflowFramesAboveDelay | read-only | current | Indicates the number of times the associated ethOamServiceFramesAboveDelay counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.19 | ColumnethOamServiceFramesAboveDelayVar | read-only | current | Indicates the number of frames arrived with delay variation greater than the delay variation threshold. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.20 | ColumnethOamServiceOverflowFramesAboveDelayVar | read-only | current | Indicates the number of times the associated ethOamServiceFramesAboveDelayVar counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.21 | ColumnethOamServiceCurrentDelay | read-only | current | Indicates the last measured delay sample. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.22 | ColumnethOamServiceCurrentDelayVariation | read-only | current | Indicates the last measured delay variation sample. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.23 | ColumnethOamServiceResetCounters | read-create | current | Reset all PM counters of the selected service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.25 | ColumnethOamServiceNearEndFrameLoss | read-only | current | Counts the number of frames lost at the near end since the time the service is up. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.26 | ColumnethOamServiceOverflowNearEndFrameLoss | read-only | current | The number of times the associated ethOamServiceNearEndFrameLoss counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.27 | ColumnethOamServiceNearEndFrameLossRatio | read-only | current | Indicates the ratio of the lost frames at the near end since the time the service is up. The value is the ratio multiplied by 1E10. 0xFFFFFFFF will be returned… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.28 | ColumnethOamServiceDmmInterval | read-create | current | Indicates the interval between DMM transmissions. This value is used by all Destination NEs defined on a Service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.29 | ColumnethOamServiceLmmInterval | read-create | current | Indicates the interval between PM transmissions: DMM and LMM in Phase 2, LMM only in Phase 3. This value is used by all Destination NEs defined on a Service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.30 | ColumnethOamServiceTxLmm | read-only | current | |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.31 | ColumnethOamServiceOverflowTxLmm | read-only | current | |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.32 | ColumnethOamServiceTxDmm | read-only | current | |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.33 | ColumnethOamServiceOverflowTxDmm | read-only | current | |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.34 | ColumnethOamServiceRxLmr | read-only | current | Counts the number of LMR frames received since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.35 | ColumnethOamServiceOverflowRxLmr | read-only | current | The number of times the associated ethOamDestNeRxLmr counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.36 | ColumnethOamServiceRxDmr | read-only | current | Counts the number of DMR frames received since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.37 | ColumnethOamServiceOverflowRxDmr | read-only | current | The number of times the associated ethOamDestNeRxDmr counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.38 | ColumnethOamServiceTxForward | read-only | current | Counts the number of transmitted frames in the forward direction since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.39 | ColumnethOamServiceOverflowTxForward | read-only | current | Indicates the number of times the associated ethOamDestNeTxForward counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.40 | ColumnethOamServiceRxForward | read-only | current | Counts the number of received frames in the forward direction since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.41 | ColumnethOamServiceOverflowRxForward | read-only | current | Indicates the number of times the associated ethOamDestNeRxForward counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.42 | ColumnethOamServiceTxBackward | read-only | current | Counts the number of transmitted frames in the backward direction since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.43 | ColumnethOamServiceOverflowTxBackward | read-only | current | Indicates the number of times the associated ethOamDestNeTxBackward counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.44 | ColumnethOamServiceRxBackward | read-only | current | Counts the number received frames in the backward direction since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.45 | ColumnethOamServiceOverflowRxBackward | read-only | current | Indicates the number of times the associated ethOamDestNeTxBackward counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.46 | ColumnethOamServiceConvertedIndex | read-only | current | This attribute defines the converted index (according to entityConvertIndexTable ) assigned to this Service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2 | TableethOamSvcCurrentStatTable | not-accessible | current | ETH OAM Service/Destination NE Current PM counters Table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1 | RowethOamSvcCurrentStatEntry | not-accessible | current | Each entry in this table contains the ETH OAM PM counters for the current interval. The counters are per Service, and/or per Destination NE. The value of the 4… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.1 | ColumnethOamSvcCurrFramesAboveDelayThresh | read-only | current | Number of frames that arrived in the current interval at a delay greater than the threshold value defined for the service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.2 | ColumnethOamSvcCurrFramesBelowDelayThresh | read-only | current | Number of frames that arrived in the current interval at a delay lower than or equal to the threshold value defined for the service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.3 | ColumnethOamSvcCurrFramesAboveDVarThresh | read-only | current | Number of frames that arrived in the current interval at a delay variation greater than the threshold value defined for the service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.4 | ColumnethOamSvcCurrFramesBelowDVarThresh | read-only | current | Number of frames that arrived in the current interval at a delay variation lower than or equal to the threshold value defined for the service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.5 | ColumnethOamSvcCurrFramesTxCounter | read-only | current | Number of trnasmitted frames in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.6 | ColumnethOamSvcCurrFarEndFramesLossCounter | read-only | current | The number of lost frames at the far end in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.7 | ColumnethOamSvcCurrMinRoundTripDelay | read-only | current | The mininal value of round trip delay in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.8 | ColumnethOamSvcCurrMaxRoundTripDelay | read-only | current | The maximum value of round trip delay in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.9 | ColumnethOamSvcCurrAvgRoundTripDelay | read-only | current | The average round trip delay in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.10 | ColumnethOamSvcCurrMaxRoundTripDVar | read-only | current | The maximum value of round trip delay variation in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.11 | ColumnethOamSvcCurrAvgRoundTripDVar | read-only | current | The average round trip delay variation in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.12 | ColumnethOamSvcCurrElapsedTime | read-only | current | The number of seconds that have elapsed since the beginning of the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.13 | ColumnethOamSvcCurrUnavailSec | read-only | current | The number of seconds that the service was unavailable in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.14 | ColumnethOamSvcCurrLmmTxFrames | read-only | current | Number of transmitted LMM frames in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.16 | ColumnethOamSvcCurrDmmTxFrames | read-only | current | Number of transmitted DMM frames in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.19 | ColumnethOamSvcCurrLmrRxFrames | read-only | current | Number of received LMR frames in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.21 | ColumnethOamSvcCurrDmrRxFrames | read-only | current | Number of received DMR frames in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.22 | ColumnethOamSvcCurrNearEndFramesLossCounter | read-only | current | The number of lost frames at the near end in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.23 | ColumnethOamSvcCurrTxFramesForward | read-only | current | The total number of frames transmited in the forward direction in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.24 | ColumnethOamSvcCurrRxFramesForward | read-only | current | The total number of of frames received in the forward direction in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.25 | ColumnethOamSvcCurrTxFramesBackward | read-only | current | The total number of of frames transmited in the backward direction (as reported by far-end) in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.26 | ColumnethOamSvcCurrRxFramesBackward | read-only | current | The total number of frames received in the backward direction (as reported by far-end) in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.27 | ColumnethOamSvcCurrUnavailableIndForward | read-only | current | Counter reflecting the number of unavailability indicators evaluated as unavailable in the forward direction in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.28 | ColumnethOamSvcCurrUnavailableIndBackward | read-only | current | Counter reflecting the number of unavailability indicators evaluated as unavailable in the backward direction in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.29 | ColumnethOamSvcCurrNearEndFrameLossRatio | read-only | current | Object reflecting the percentage lost frames at the near end direction. Equals to (near End frame loss / Tx frame count in the forward direction) in the curren… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.30 | ColumnethOamSvcCurrFarEndFrameLossRatio | read-only | current | Object reflecting the percentage lost frames at the far end direction. Equals to (Far End frame loss / Tx frame count in the forward direction) in the current … |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.31 | ColumnethOamSvcCurrMinRoundTripDVar | read-only | current | The minimal value of round trip delay variation in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.32 | ColumnethOamSvcCurrMinForwardDelay | read-only | current | The minimal value of one way (forward 1DM) delay variation in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.33 | ColumnethOamSvcCurrMaxForwardDelay | read-only | current | The maximum value of one way (forward 1DM) delay variation in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.34 | ColumnethOamSvcCurrAvgForwardDelay | read-only | current | The average value of one way (forward 1DM) delay variation in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.35 | ColumnethOamSvcCurrMinForwardDVar | read-only | current | The minimal value of one way forward delay variation in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.36 | ColumnethOamSvcCurrMaxForwardDVar | read-only | current | The maximum value of one way forward delay variation in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.37 | ColumnethOamSvcCurrAvgForwardDVar | read-only | current | The average value of one way forward delay variation in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.38 | ColumnethOamSvcCurrMinBackwardDVar | read-only | current | The minimal value of one way backward delay variation in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.39 | ColumnethOamSvcCurrMaxBackwardDVar | read-only | current | The maximum value of one way backward delay variation in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.40 | ColumnethOamSvcCurrAvgBackwardDVar | read-only | current | The average value of one way backward delay variation in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.41 | ColumnethOamSvcCurrAvailableIndForward | read-only | current | Counter reflecting the number of availability indicators evaluated as available in the forward direction in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.42 | ColumnethOamSvcCurrAvailableIndBackward | read-only | current | Counter reflecting the number of availability indicators evaluated as available in the backward direction in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3 | TableethOamSvcIntervalTable | not-accessible | current | Each entry in this table contains the ETH OAM PM counters collected over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 … |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1 | RowethOamSvcIntervalEntry | not-accessible | current | Interval Statistics per service |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.1 | ColumnethOamSvcIntervalNum | not-accessible | current | The Interval index, which is actualy the Interval number, where 1 is the most recently completed 15 minute interval, and 96 is the least recently completed 15 … |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.2 | ColumnethOamSvcIntervalFramesAboveDelayThresh | read-only | current | Number of frames that arrived in a delay greater than the threshold value defined for the service in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.3 | ColumnethOamSvcIntervalFramesBelowDelayThresh | read-only | current | Number of frames that arrived in a delay lower than the threshold value defined for the service in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.4 | ColumnethOamSvcIntervalFramesAboveDVarThresh | read-only | current | Number of frames that arrived in a delay variation greater than the threshold value defined for the service in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.5 | ColumnethOamSvcIntervalFramesBelowDVarThresh | read-only | current | Number of frames that arrived in a delay variation lower than the threshold value defined for the service in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.6 | ColumnethOamSvcIntervalFramesTxCounter | read-only | current | Number of trnasmitted frames in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.7 | ColumnethOamSvcIntervalFarEndFramesLossCounter | read-only | current | The number of lost frames at the far end in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.8 | ColumnethOamSvcIntervalMinRoundTripDelay | read-only | current | The mininal value of round trip delay in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.9 | ColumnethOamSvcIntervalMaxRoundTripDelay | read-only | current | The maximum value of round trip delay in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.10 | ColumnethOamSvcIntervalAvgRoundTripDelay | read-only | current | The average round trip delay in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.11 | ColumnethOamSvcIntervalMaxRoundTripDVar | read-only | current | The maximum value of round trip delay variation in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.12 | ColumnethOamSvcIntervalAvgRoundTripDVar | read-only | current | The average round trip delay variation in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.13 | ColumnethOamSvcIntervalUnavailSec | read-only | current | The number of seconds that the service was unavailable in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.14 | ColumnethOamSvcIntervalLmmTxFrames | read-only | current | Number of transmitted LMM frames in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.16 | ColumnethOamSvcIntervalDmmTxFrames | read-only | current | Number of transmitted DMM frames in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.19 | ColumnethOamSvcIntervalLmrRxFrames | read-only | current | Number of received LMR frames in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.21 | ColumnethOamSvcIntervalDmrRxFrames | read-only | current | Number of received DMR frames in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.22 | ColumnethOamSvcIntervalNearEndFramesLossCounter | read-only | current | The number of lost frames at the near end in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.23 | ColumnethOamSvcIntervalTxFramesForward | read-only | current | The number of transmitted frames in the forward direction in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.24 | ColumnethOamSvcIntervalRxFramesForward | read-only | current | The number of received frames in the forward direction in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.25 | ColumnethOamSvcIntervalTxFramesBackward | read-only | current | The number of transmitted frames in the backward direction in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.26 | ColumnethOamSvcIntervalRxFramesBackward | read-only | current | The number of received frames in the backward direction in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.27 | ColumnethOamSvcIntervalUnavailableIndForward | read-only | current | Counter reflecting the number of unavailability indicators evaluated as unavailable in the forward direction in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.28 | ColumnethOamSvcIntervalUnavailableIndBackward | read-only | current | Counter reflecting the number of unavailability indicators evaluated as unavailable in the backward direction in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.29 | ColumnethOamSvcIntervalNearEndFrameLossRatio | read-only | current | Object reflecting the percentage lost frames at the near end direction. Equals to (near End frame loss / Tx frame count in the forward direction) in the curren… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.30 | ColumnethOamSvcIntervalFarEndFrameLossRatio | read-only | current | Object reflecting the percentage lost frames at the far end direction. Equals to (Far End frame loss / Tx frame count in the forward direction) in the current … |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.31 | ColumnethOamSvcIntervalValidData | read-only | current | This object indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.32 | ColumnethOamSvcIntervalDuration | read-only | current | The Object presents duration of a particular interval in seconds. The partial second is counted. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.33 | ColumnethOamSvcIntervalTimeStamp | read-only | current | The Object presents date and time of start of Interval. Time zone octets are not used (OCTET STRING (SIZE (8)). |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.34 | ColumnethOamSvcIntervalMinRoundTripDVar | read-only | current | The minimal value of round trip delay variation in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.35 | ColumnethOamSvcIntervalMinForwardDelay | read-only | current | The minimal value of one way (forward 1DM) delay variation in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.36 | ColumnethOamSvcIntervalMaxForwardDelay | read-only | current | The maximum value of one way (forward 1DM) delay variation in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.37 | ColumnethOamSvcIntervalAvgForwardDelay | read-only | current | The average value of one way (forward 1DM) delay variation in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.38 | ColumnethOamSvcIntervalMinForwardDVar | read-only | current | The minimal value of one way forward delay variation in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.39 | ColumnethOamSvcIntervalMaxForwardDVar | read-only | current | The maximum value of one way forward delay variation in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.40 | ColumnethOamSvcIntervalAvgForwardDVar | read-only | current | The average value of one way forward delay variation in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.41 | ColumnethOamSvcIntervalMinBackwardDVar | read-only | current | The minimal value of one way backward delay variation in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.42 | ColumnethOamSvcIntervalMaxBackwardDVar | read-only | current | The maximum value of one way backward delay variation in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.43 | ColumnethOamSvcIntervalAvgBackwardDVar | read-only | current | The average value of one way backward delay variation in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.44 | ColumnethOamSvcIntervalAvailableIndForward | read-only | current | Counter reflecting the number of availability indicators evaluated as available in the forward direction in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.45 | ColumnethOamSvcIntervalAvailableIndBackward | read-only | current | Counter reflecting the number of availability indicators evaluated as available in the backward direction in the selected interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4 | TableethOamSvcTotalTable | not-accessible | current | ETH OAM Service Total (24H) Statistics Table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1 | RowethOamSvcTotalEntry | not-accessible | current | Each entry in this table contains the ETH OAM PM counters collected over the previous 24 hours of operation. The counters are per Service, and/or per Destinati… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.1 | ColumnethOamSvcTotalFramesAboveDelayThresh | read-only | current | Number of frames that arrived in a delay greater than the threshold value defined for the service in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.2 | ColumnethOamSvcTotalFramesBelowDelayThresh | read-only | current | Number of frames that arrived in a delay lower than the threshold value defined for the service in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.3 | ColumnethOamSvcTotalFramesAboveDVarThresh | read-only | current | Number of frames that arrived in a delay variation greater than the threshold value defined for the service in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.4 | ColumnethOamSvcTotalFramesBelowDVarThresh | read-only | current | Number of frames that arrived in a delay variation lower than the threshold value defined for the service in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.5 | ColumnethOamSvcTotalFramesTxCounter | read-only | current | Number of trnasmitted frames in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.6 | ColumnethOamSvcTotalFarEndFramesLossCounter | read-only | current | The nuumber of lost frames at the far end in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.7 | ColumnethOamSvcTotalMinRoundTripDelay | read-only | current | The mininal value of round trip delay in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.8 | ColumnethOamSvcTotalMaxRoundTripDelay | read-only | current | The maximum value of round trip delay in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.9 | ColumnethOamSvcTotalAvgRoundTripDelay | read-only | current | The average round trip delay in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.10 | ColumnethOamSvcTotalMaxRoundTripDVar | read-only | current | The maximum value of round trip delay variation in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.11 | ColumnethOamSvcTotalAvgRoundTripDVar | read-only | current | The average round trip delay variation in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.12 | ColumnethOamSvcTotalUnavailSec | read-only | current | The number of seconds that the service was unavailable in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.13 | ColumnethOamSvcTotalLmmTxFrames | read-only | current | Number of transmitted LMM frames in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.15 | ColumnethOamSvcTotalDmmTxFrames | read-only | current | Number of transmitted DMM frames in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.18 | ColumnethOamSvcTotalLmrRxFrames | read-only | current | Number of received LMR frames in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.20 | ColumnethOamSvcTotalDmrRxFrames | read-only | current | Number of received DMR frames in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.21 | ColumnethOamSvcTotalNearEndFramesLossCounter | read-only | current | The number of lost frames at the near end in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.22 | ColumnethOamSvcTotalTxFramesForward | read-only | current | Number of transmitted frames in the forward direction in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.23 | ColumnethOamSvcTotalRxFramesForward | read-only | current | Number of received frames in the forward direction in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.24 | ColumnethOamSvcTotalTxFramesBackward | read-only | current | Number of transmitted frames in the backward direction in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.25 | ColumnethOamSvcTotalRxFramesBackward | read-only | current | Number of received frames in the backward direction in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.26 | ColumnethOamSvcTotalUnavailableIndForward | read-only | current | Counter reflecting the number of unavailability indicators evaluated as unavailable in the forward direction in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.27 | ColumnethOamSvcTotalUnavailableIndBackward | read-only | current | Counter reflecting the number of unavailability indicators evaluated as unavailable in the backward direction in the last 24H |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.29 | ColumnethOamSvcTotalMinRoundTripDVar | read-only | current | The minimal value of round trip delay variation in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.30 | ColumnethOamSvcTotalMinForwardDelay | read-only | current | The minimal value of one way (forward 1DM) delay variation in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.31 | ColumnethOamSvcTotalMaxForwardDelay | read-only | current | The maximum value of one way (forward 1DM) delay variation in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.32 | ColumnethOamSvcTotalAvgForwardDelay | read-only | current | The average value of one way (forward 1DM) delay variation in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.33 | ColumnethOamSvcTotalMinForwardDVar | read-only | current | The minimal value of one way (forward 1DM) delay variation in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.34 | ColumnethOamSvcTotalMaxForwardDVar | read-only | current | The maximum value of one way (forward 1DM) delay variation in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.35 | ColumnethOamSvcTotalAvgForwardDVar | read-only | current | The average value of one way (forward 1DM) delay variation in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.36 | ColumnethOamSvcTotalMinBackwardDVar | read-only | current | The minimal value of one way backward delay variation in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.37 | ColumnethOamSvcTotalMaxBackwardDVar | read-only | current | The maximum value of one way backward delay variation in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.38 | ColumnethOamSvcTotalAvgBackwardDVar | read-only | current | The average value of one way backward delay variation in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.39 | ColumnethOamSvcTotalForwardFrameLossRatio | read-only | current | Object reflecting the percentage lost frames at the forward direction. Equals to (near End frame loss / Tx frame count in the backward direction) in the last 2… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.40 | ColumnethOamSvcTotalBackwardFrameLossRatio | read-only | current | Object reflecting the percentage lost frames at the backward direction. Equals to (Far End frame loss / Tx frame count in the forward direction) in the last 24… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.41 | ColumnethOamSvcTotalAvailableIndForward | read-only | current | Counter presenting the number of availability indicators evaluated as available in the forward direction in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.42 | ColumnethOamSvcTotalAvailableIndBackward | read-only | current | Counter presenting the number of availability indicators evaluated as available in the backward direction in the last 24H. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5 | TableethOamDestNeTable | not-accessible | current | One of the targets in ETH OAM is to support point-to-point as well as point-to-multipoint PM. For point-to-multipoint support it is needed to identify each of … |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1 | RowethOamDestNeEntry | not-accessible | current | Each entry in the table holds the parameters of a Destination NE. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.1 | ColumnethOamDestNeIdx | not-accessible | current | This object indicates the Index of the Destination NE being accessed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.2 | ColumnethOamDestNeRowStatus | read-create | current | This attribute allows to create/delete a row in this table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.3 | ColumnethOamDestNePmDestAddr | read-create | current | This object indicates the destination NE (remote) MAC Address that PM frames (LMMs, DMMs, LMRs and DMRs) are sent to. If its value is 0, then the ethOamDestNeP… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.4 | ColumnethOamDestNePmRemoteMepId | read-create | current | This object indicates the Remote MEP ID that PM frames are sent to. This parameter refers to dot1agCfmMaMepListIdentifier of the MEP. If no remote MEP has been… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.5 | ColumnethOamDestNePmActivity | read-create | deprecated | This object defines the PM activity of the specific Destination NE. Setting this object to 0 (all zeros) will stop all PM activity for the Destination NE. sing… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.6 | ColumnethOamDestNeTxFrames | read-only | current | Counts the total number of frames transmitted since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.7 | ColumnethOamDestNeOverflowTxFrames | read-only | current | The number of times the associated ethOamDestNeTxFrames counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.8 | ColumnethOamDestNeTxLmm | read-only | current | Counts the number of LMM frames transmitted since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.9 | ColumnethOamDestNeOverflowTxLmm | read-only | current | The number of times the associated ethOamDestNeTxLmm counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.12 | ColumnethOamDestNeTxDmm | read-only | current | Counts the number of DMM frames transmitted since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.13 | ColumnethOamDestNeOverflowTxDmm | read-only | current | The number of times the associated ethOamDestNeTxDmm counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.18 | ColumnethOamDestNeRxLmr | read-only | current | Counts the number of LMR frames received since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.19 | ColumnethOamDestNeOverflowRxLmr | read-only | current | The number of times the associated ethOamDestNeRxLmr counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.22 | ColumnethOamDestNeRxDmr | read-only | current | Counts the number of DMR frames received since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.23 | ColumnethOamDestNeOverflowRxDmr | read-only | current | The number of times the associated ethOamDestNeRxDmr counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.24 | ColumnethOamDestNeFarEndFrameLoss | read-only | current | Counts the number of frames lost at the far end since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.25 | ColumnethOamDestNeOverflowFarEndFrameLoss | read-only | current | The number of times the associated ethOamDestNeFarEndFrameLoss counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.26 | ColumnethOamDestNeFarEndFrameLossRatio | read-only | current | Indicates the ratio of the lost frames at the far end since the time the service is up. The value is the ratio multiplied by 1E10. 0xFFFFFFFF will be returned … |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.27 | ColumnethOamDestNeTimeElapsed | read-only | current | Indicates the time elapsed in seconds since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.30 | ColumnethOamDestNeFramesAboveDelay | read-only | current | Indicates the number of frames arrived with delay greater than the delay threshold, since the time the service is up, or since last counters reset. Delay thres… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.31 | ColumnethOamDestNeOverflowFramesAboveDelay | read-only | current | Indicates the number of times the associated ethOamDestNeFramesAboveDelay counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.32 | ColumnethOamDestNeFramesAboveDelayVar | read-only | current | Indicates the number of frames arrived with delay variation greater than the delay variation threshold, since the time the service is up, or since last counter… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.33 | ColumnethOamDestNeOverflowFramesAboveDelayVar | read-only | current | Indicates the number of times the associated ethOamDestNeFramesAboveDelayVar counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.34 | ColumnethOamDestNeCurrentDelay | read-only | current | Indicates the last measured delay sample. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.35 | ColumnethOamDestNeCurrentDelayVariation | read-only | current | Indicates the last measured delay variation sample. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.36 | ColumnethOamDestNeResetCounters | read-create | current | Reset all PM counters related to the Destination NE. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.37 | ColumnethOamDestNeNearEndFrameLoss | read-only | current | Counts the number of frames lost at the near end since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.38 | ColumnethOamDestNeOverflowNearEndFrameLoss | read-only | current | The number of times the associated ethOamDestNeNearEndFrameLoss counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.39 | ColumnethOamDestNeNearEndFrameLossRatio | read-only | current | Indicates the ratio of the lost frames at the near end since the time the service is up. The value is the ratio multiplied by 1E10. 0xFFFFFFFF will be returned… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.40 | ColumnethOamDestNeLmmTraffic | read-create | current | Determine if Frame Loss measurements will be applied on synthetic traffic or on real traffic (all, Green only or Yellow only, with or without CCM). Note that i… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.41 | ColumnethOamDestNeFramesAboveDelayBinProfile | read-create | current | This variable defines the delay measurement bin profile assigned to this Dest NE. If set to '0', no profile is assigned to this Dest NE. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.42 | ColumnethOamDestNeFramesAboveDelayVarBinProfile | read-create | current | This variable defines the dalay variation measurement bin profile assigned to this Dest NE. If set to '0', no profile is assigned to this Dest NE. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.43 | ColumnethOamDestNeDmmDataTlvLength | read-create | current | This variable denotes the length of the data TLV sent in DMM frames. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.44 | ColumnethOamDestNeLossActivity | read-create | current | Determine the type of activity for Tx LMM. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.45 | ColumnethOamDestNeDelayActivity | read-create | current | Determine the type of activity for Tx DMM. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.46 | ColumnethOamDestNeTxForward | read-only | current | Counts the number of transmitted frames in the forward direction since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.47 | ColumnethOamDestNeOverflowTxForward | read-only | current | Indicates the number of times the associated ethOamDestNeTxForward counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.48 | ColumnethOamDestNeRxForward | read-only | current | Counts the number of received frames in the forward direction since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.49 | ColumnethOamDestNeOverflowRxForward | read-only | current | Indicates the number of times the associated ethOamDestNeRxForward counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.50 | ColumnethOamDestNeTxBackward | read-only | current | Counts the number of transmitted frames in the backward direction since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.51 | ColumnethOamDestNeOverflowTxBackward | read-only | current | Indicates the number of times the associated ethOamDestNeTxBackward counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.52 | ColumnethOamDestNeRxBackward | read-only | current | Counts the number received frames in the backward direction since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.53 | ColumnethOamDestNeOverflowRxBackward | read-only | current | Indicates the number of times the associated ethOamDestNeTxBackward counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.54 | ColumnethOamDestNeUnavailableIndForward | read-only | current | Counts the number of unavailability indicators evaluated as unavailable in the forward direction since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.55 | ColumnethOamDestNeOverflowUnavailableIndForward | read-only | current | Indicates the number of times the associated ethOamDestNeUnavailableIndForward counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.56 | ColumnethOamDestNeUnavailableIndBackward | read-only | current | Counts Counts the number of unavailability indicators evaluated as unavailable in the backward direction since the time the service is up, or since last counte… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.57 | ColumnethOamDestNeOverflowUnavailableIndBackward | read-only | current | Indicates the number of times the associated ethOamDestNeUnavailableIndBackward counter has overflowed. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.58 | ColumnethOamDestNeUnavailRatioForward | read-only | current | Indicates the ratio of the unavailable seconds, in the forward direction, in the last 48 intervals. (12 hours window). The mib value is the ratio multiplied by… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.59 | ColumnethOamDestNeUnavailRatioBackward | read-only | current | Indicates the ratio of the unavailable seconds, in the backward direction, in the last 48 intervals period (12 hours window). The mib value is the ratio multip… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.61 | ColumnethOamDestNeDescr | read-create | current | A textual string containing information about the Remote MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.62 | ColumnethOamDestNeConvertedIndex | read-create | current | This attribute defines the converted index (according to entityConvertIndexTable ) assigned to this Dest NE. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.63 | ColumnethOamDestNeSlmDataTlvLength | read-create | current | This object indicates the SLM Data TLV length. It is taken into consideration only if ethOamDestNeLmmTraffic is set to 'slm'(4). |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.64 | ColumnethOamDestNeLmMode | read-create | current | Determines Loss Measurement work mode: rx(1): Rx only. txAndRx(2): Tx and Rx. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.65 | ColumnethOamDestNeSlmTestId | read-create | current | This object indicates the unique indication per EVC.COS and MEP/RMEP of SLM Test ID. Range of values is 1..255. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.66 | ColumnethOamDestNeForwardDelayVarBinProfile | read-create | current | This variable defines the 1-Way delay measurement bin profile assigned to this Dest NE forward direction. if set to '0', no profile is assigned to this Dest NE. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.67 | ColumnethOamDestNeBackwardDelayVarBinProfile | read-create | current | This variable defines the 1-Way delay measurement bin profile assigned to this Dest NE backward direction. if set to '0', no profile is assigned to this Dest N… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.68 | ColumnethOamDestNeAvailableIndForward | read-only | current | Counts the number of availability indicators evaluated as available in the forward direction since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.69 | ColumnethOamDestNeAvailableIndBackward | read-only | current | Counts the number of availability indicators evaluated as available in the backward direction since the time the service is up, or since last counters reset. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.70 | ColumnethOamDestNeDelayVariationForward | read-only | current | Indicates the last calculated one way forward delay variation value. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.71 | ColumnethOamDestNeDelayVariationBackward | read-only | current | Indicates the last calculated one way forward delay variation value. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.6 | TableethOamSvcRmonConfigTable | not-accessible | current | The purpose of this table is to enable RMON parameters configuration for all Destination NEs that exists for a certain service. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.6.1 | RowethOamSvcRmonConfigEntry | not-accessible | current | An entry in this table includes parameters to be configured in alarmTable and eventTable of RMON-MIB. When the manager creates an entry in this table, the agen… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.1 | ColumnethOamSvcRmonConfigPerfAttrib | not-accessible | current | Each value corresponds to a service performance attribute (as defined in MEF 10.1), that can be monitored. The value set to this variable is used to resolve wh… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.2 | ColumnethOamSvcRmonConfigRowStatus | read-create | current | This variable enables table row creation and deletion. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.3 | ColumnethOamSvcRmonConfigAlarmInterval | read-create | current | The value set to this variable will be set (by the agent) to alarmTable.alarmInterval in RMON-MIB for each Dest NE. The measurement unit is seconds. For furthe… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.4 | ColumnethOamSvcRmonConfigAlarmRisingThresh | read-create | current | The value set to this variable will be set (by the agent) to alarmTable.alarmRisingThreshold in RMON-MIB for each Dest NE. For further information refer to RFC… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.5 | ColumnethOamSvcRmonConfigAlarmFallingThresh | read-create | current | The value set to this variable will be set (by the agent) to alarmTable.alarmFallingThreshold in RMON-MIB for each Dest NE. For further information refer to RF… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.6 | ColumnethOamSvcRmonConfigEventType | read-create | current | The value set to this variable will be set (by the agent) to eventTable.eventType in RMON-MIB for each Dest NE. For further information refer to RFC-2819. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.7 | TableethOamMeasureBinProfileTable | not-accessible | current | This table defines measurement bin profiles, to be used for threshold setting of FD (Frame Delay) and FDV (Frame Delay Variation) measurements. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.7.1 | RowethOamMeasureBinProfileEntry | not-accessible | current | Each entry in this table represents a profile that can be bind to a Dest NE. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.7.1.1 | ColumnethOamMeasureBinProfileIndex | not-accessible | current | This attribute defines the Measurement Bin profile index. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.7.1.2 | ColumnethOamMeasureBinProfileRowStatus | read-create | current | This attribute is used to create a new row or to delete an existing row in the table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.7.1.3 | ColumnethOamMeasureBinProfileName | read-create | current | A string to denote the profile's name. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.7.1.4 | ColumnethOamMeasureBinThresh | read-create | current | The structure of this variable is as follows: Each consecutive 4 bytes represent a threshold value. There are up to 10 possible bins per measurement type (FD, … |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.8 | TableethOamDelayCurrentBinsTable | not-accessible | current | This table holds a set of Frame Delay bin or Frame Delay Variation counters in the current interval. The number of bins is determined according to the Bin Prof… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.8.1 | RowethOamDelayCurrentBinsEntry | not-accessible | current | Each entry in the table holds a Frame Delay or Frame Delay Variation bin counter of a Destination NE in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.8.1.1 | ColumnethOamDelayCurrentBinCounterType | not-accessible | current | Define counter type for current bin measurements (See Textual Convention for detailed defintion.) |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.8.1.2 | ColumnethOamDelayCurrentBinNumber | not-accessible | current | This variable denotes the Frame Delay or Frame Delay Variation Bin number in the current interval. The bin upper threshold is derived from the corresponding by… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.8.1.3 | ColumnethOamDelayCurrentBinValue | read-only | current | This variable counts the number of frames that arrived in the current interval with delay or or Delay Variation falling within the bin range. |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.10 | TableethOamDelayIntervalBinsTable | not-accessible | current | This table holds a set of Frame Delay or Frame Delay Variation bin counters in the last 24H period. The number of bins is determined according to the Bin Profi… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.10.1 | RowethOamDelayIntervalBinsEntry | not-accessible | current | Each entry in the table holds a Frame Delay or Frame Delay Variation bin counter of a Destination NE in the selected interval. For Dest NE resolution (ethOamSe… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.10.1.1 | ColumnethOamDelayIntervalBinCounterType | not-accessible | current | Define counter type for current bin measurements (See Textual Convention for detailed defintion.) |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.10.1.2 | ColumnethOamDelayIntervalBinNumber | not-accessible | current | This variable denotes the Frame Delay or Frame Delay Variation bin number in the selected interval. The bin upper threshold is derived from the corresponding b… |
| 1.3.6.1.4.1.164.3.1.6.1.3.2.10.1.3 | ColumnethOamDelayIntervalBinValue | read-only | current | This variable counts the number of frames in the selected interval that arrived with delay or Delay Variation falling within the bin range. |
| 1.3.6.1.4.1.164.3.1.6.1.3.3 | TableradMdTable | not-accessible | current | The MaintenanceDomain table. Each row in the table represents a different maintenance domain. A Maintenance domain is described in 802.1ag (3.22) as the networ… |
| 1.3.6.1.4.1.164.3.1.6.1.3.3.1 | RowradMdEntry | not-accessible | current | The Maintenance Domain table entry. This entry is not lost upon reboot. It is backed up by stable storage |
| 1.3.6.1.4.1.164.3.1.6.1.3.3.1.1 | ColumnradMdIndex | not-accessible | current | The index to the maintenance domain table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.3.1.2 | ColumnradMdFormat | read-create | current | The type (and thereby format) of the Maintenance Domain Name. |
| 1.3.6.1.4.1.164.3.1.6.1.3.3.1.3 | ColumnradMdName | read-create | current | The Maintenance Domain name. The type/format of this object is determined by the value of the radMdNameType object. Each Maintenance Domain has unique name amo… |
| 1.3.6.1.4.1.164.3.1.6.1.3.3.1.4 | ColumnradMdRowStatus | read-create | current | This attribute allows to create/delete a row in this table. The writable columns in a row can not be changed if the row is active. All columns must have a vali… |
| 1.3.6.1.4.1.164.3.1.6.1.3.4 | TableradMepLtrTable | not-accessible | current | This table contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1 | RowradMepLtrEntry | not-accessible | current | The LinktraceReply table entry. |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.1 | ColumnradMepLtrReceiveOrder | not-accessible | current | An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. radMepLtrReceiveOrder are assigned sequentially from 1, in th… |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.2 | ColumnradMepLtrTtl | read-only | current | TTL field value for a returned LTR. |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.3 | ColumnradMepLtrMacAddr | read-only | current | The MAC address in the header of the returned LTR. |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.4 | ColumnradMepLtrRelay | read-only | current | The value returned in the Relay Action field: rlyHit - the LTM reached an MP whose MAC address matches the target MAC address. rlyFdb - the Egress Port was det… |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.5 | ColumnradMepLtrIngress | read-only | current | The value returned in the Ingress Action Field of the LTM. ingNoTlv - no Reply Ingress TLV was returned in the LTM. ingOK - the target data frame would be pass… |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.6 | ColumnradMepLtrIngressPortIdSubtype | read-only | current | The format of the Ingress Port ID. If the radMepLtrIngress object contains the value egrNoTlv(1), then the contents of this object are meaningless. 802.1ag cla… |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.7 | ColumnradMepLtrIngressPortId | read-only | current | Ingress Port ID. This is an alpha-numeric string that contains a specific identifier for the port. The format of this object is determined by the value of the … |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.8 | ColumnradMepLtrEgress | read-only | current | The value returned in the Egress Action Field of the LTM. The value egrNoTlv(1) indicates that no Reply Egress TLV was returned in the LTM. 802.1ag clauses 12.… |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.9 | ColumnradMepLtrEgressPortIdSubtype | read-only | current | The format of the egress Port ID. If the radMepLtrEgress object contains the value egrNoTlv(1), then the contents of this object are meaningless. 802.1ag claus… |
| 1.3.6.1.4.1.164.3.1.6.1.3.4.1.10 | ColumnradMepLtrEgressPortId | read-only | current | Egress Port ID. The format of this object is determined by the value of the radMepLtrEgressPortIdSubtype object. If the radMepLtrEgress object contains the val… |
| 1.3.6.1.4.1.164.3.1.6.1.3.5 | TableradMepCcStatusTable | not-accessible | current | This table contains a list of CC Status received by a specific MEP from different Remote MEPs. |
| 1.3.6.1.4.1.164.3.1.6.1.3.5.1 | RowradMepCcStatusEntry | not-accessible | current | An entry in the CC Status Table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.5.1.1 | ColumnradMepRemoteMepIdx | not-accessible | current | This is a running index for arriving CC messages (from different Remote MEPs) for a specific MEP ID. |
| 1.3.6.1.4.1.164.3.1.6.1.3.5.1.2 | ColumnradMepCcStatusRemMepId | read-create | current | This attribute indicates the Remote MEP ID from which the CC messages has arrived. |
| 1.3.6.1.4.1.164.3.1.6.1.3.5.1.3 | ColumnradMepCcStat | read-only | current | This object indicates the Continuity Check (CC) status (ITU-T Y.1731, Appendix I): mismerge - A MEP detects a Mismerge condition when a CCM frame arrives with … |
| 1.3.6.1.4.1.164.3.1.6.1.3.5.1.4 | ColumnradMepCcStatusMacAddr | read-only | current | This object indicates the MAC Address in the CC Status message received. |
| 1.3.6.1.4.1.164.3.1.6.1.3.6 | ScalarethOamStdEtherType | read-write | current | The Standard Ether Type in an OAM message. This object will be RW until a formal value will be issued for standard Ethernet Type. When such Standard will exist… |
| 1.3.6.1.4.1.164.3.1.6.1.3.7 | ScalarethOamStdMacAddress | read-write | current | The Standard MAC Address in an OAM message. This object will be RW until a formal value will be issued for standard MAC Address. When such Standard will exist,… |
| 1.3.6.1.4.1.164.3.1.6.1.3.8 | Tabledot1agXCfmMdTable | not-accessible | current | The Maintenance Domain table. Each row in the table represents a different maintenance association. |
| 1.3.6.1.4.1.164.3.1.6.1.3.8.1 | Rowdot1agXCfmMdEntry | not-accessible | current | The Maintenance Domain table entry. |
| 1.3.6.1.4.1.164.3.1.6.1.3.8.1.1 | Columndot1agXCfmMdProtocol | read-create | current | . |
| 1.3.6.1.4.1.164.3.1.6.1.3.9 | Tabledot1agXCfmMepTable | not-accessible | current | The Maintenance Association End Point (MEP) table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1 | Rowdot1agXCfmMepEntry | not-accessible | current | The MEP table entry. |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.1 | Columndot1agXCfmMepContinuityVerMode | read-create | current | This object determines the OAM behavior of the MEP: disabled - no Continuity Verification is done cc_based - Continuity Verification is done based on incoming … |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.2 | Columndot1agXCfmMepDestAddrType | read-create | current | This object determines if the OAM messages are sent to user defined unicast address, or to RAD proprietary multicast address. |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.3 | Columndot1agXCfmMepDestMacAddr | read-create | current | This object determines the MAC address that OAM packets are sent to. |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.4 | Columndot1agXCfmMepMappingProfile | read-create | current | This attribute defines the Mapping/classification profile (flowMappingProfileTable ) assigned to this MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.5 | Columndot1agXCfmMepQBlock | read-create | current | This attribute defines the QBlock assigned to this MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.6 | Columndot1agXCfmMepFixedQueueMapping | read-create | current | This attribute defines the queue (cosProfileTable) that will be assigned to the MEP. A value of 255 means that the Mep will use the profile according to dot1ag… |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.7 | Columndot1agXCfmMepQueueMappingProfile | read-create | current | This attribute defines the queueMapping Profile (CosProfileTable) assigned to this MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.8 | Columndot1agXCfmMepConvertedIndex | read-only | current | This attribute defines the converted index (according to entityConvertIndexTable ) assigned to this MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.9 | Columndot1agXCfmMepPmDestAddrType | read-create | current | This object defines the type of MAC Address being used by the PM frames (Delay Measurement frames and Loss Measurement frames). |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.10 | Columndot1agXCfmMepForwardingMode | read-create | current | This variable denotes the mode MEP forwarding mode. If set to elan(2) mode, dot1agXCfmMepPmDestAddrType must be unicast(1). |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.11 | Columndot1agXCfmMepLbmDataTlvLength | read-create | current | This variable denotes the length of the data TLV sent in LBM. |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.12 | Columndot1agXCfmMepClientMdLevel | read-create | current | This variable denotes the client MD level to transmit ETH-AIS and LCK frames. It is irrelevant if the corresponding dot1agCfmMdMdLevel equals to 7. Otherwise, … |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.13 | Columndot1agXCfmMepAisTransmit | read-create | current | This variable denotes if ETH-AIS frame transmission is enabled or not. It can be enabled only if the value of the corresponding dot1agCfmMdMdLevel is less than… |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.14 | Columndot1agXCfmMepAisInterval | read-create | current | This variable denotes the interval of ETH-AIS frame transmission. |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.15 | Columndot1agXCfmMepAisPriority | read-create | current | This variable denotes the priority of ETH-AIS frames. |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.16 | Columndot1agXCfmMepDefects | read-create | current | An extnetion to dot1agCfmMepDefects which is A vector of Boolean error conditions, any of which may be true. A MEP can detect and report a number of defects, a… |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.17 | Columndot1agXCfmMepLastAlarmDefect | read-only | current | This object indicates the last defect that generated an alarm at the MEP: none no defects since FNG_RESET defRDICCM RDI CCM defMACstatus MAC status defRemoteCC… |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.19 | Columndot1agXCfmMepCosMapping | read-create | current | This attribute defines MEP CoS mapping. The value 0..7 indicates fixed CoS selection. The value 255 defines using of dot1agXCfmMepCosMappingProfile OBJECT belo… |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.20 | Columndot1agXCfmMepCosMappingProfile | read-create | current | This attribute contains cosInternalProfileIndex that defines CoS mapping profile assigned to this MEP, see cosInternalProfileTable. |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.24 | Columndot1agXCfmMepCcStatus | read-only | current | This obejct indicates the Continuity Check status. If no bit is set then it means that the ststus is ok. If notApplicable (0) is set then the other bits should… |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.28 | Columndot1agXCfmMepStatus | read-only | current | This objects indicates the test status of the MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.29 | Columndot1agXCfmMepExcludeCustomerTags | read-create | current | This objects denotes whether the tag structure of transmitted OAM frames includes or excludes the customer tags (C-tags). A value of true(1) forbids C-tags on … |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.30 | Columndot1agXCfmMepClearStatsCmd | read-create | current | A command that instructs the agent to clear running statistics of selected MEP. Setting this object to on(3), shall clear the MEP statistics. Upon completion, … |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.31 | Columndot1agXCfmMepTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the current statistics interval of the MEPs (local and remote). (Time elapsed is common to MEP c… |
| 1.3.6.1.4.1.164.3.1.6.1.3.9.1.32 | Columndot1agXCfmMepCcmTx | read-only | current | Total number of CCM PDUs transmitted by the MEP |
| 1.3.6.1.4.1.164.3.1.6.1.3.10 | Tabledot1agXCfmMepDbTable | not-accessible | deprecated | The MEP DB table, now used for Remote MEP. Table was deprectated and replaced by the following objects: dot1agCfmMepDefects, and dot1agCfmMepDbRMepState (stand… |
| 1.3.6.1.4.1.164.3.1.6.1.3.10.1 | Rowdot1agXCfmMepDbEntry | not-accessible | deprecated | The MEP Database table entry. |
| 1.3.6.1.4.1.164.3.1.6.1.3.10.1.1 | Columndot1agXCfmMepCcStat | read-only | deprecated | This object indicates the Continuity Check (CC) status (ITU-T Y.1731, Appendix I): mismerge - A MEP detects a Mismerge condition when a CCM frame arrives with … |
| 1.3.6.1.4.1.164.3.1.6.1.3.10.1.2 | Columndot1agXCfmMepDbConvertedIndex | read-write | deprecated | This attribute defines the converted index (according to entityConvertIndexTable ) assigned to this remote MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.11 | Tabledot1agXCfmMaMepListTable | not-accessible | current | The MA List table |
| 1.3.6.1.4.1.164.3.1.6.1.3.11.1 | Rowdot1agXCfmMaMepListEntry | not-accessible | current | The known MEPS table entry. |
| 1.3.6.1.4.1.164.3.1.6.1.3.11.1.1 | Columndot1agXCfmMaMepListLocalMep | read-create | current | If the entry is of a Remote MEP then this variable denotes the Local MEPID that the Remote MEPID applies to. If the entry is of a Local MEP, then this variable… |
| 1.3.6.1.4.1.164.3.1.6.1.3.11.1.2 | Columndot1agXCfmMaMepListDescr | read-create | current | This object defines the description of MEP entity. By default the device sets this object value in the following format: 1. If md name is not empty: md: 'IEEE8… |
| 1.3.6.1.4.1.164.3.1.6.1.3.12 | NodeethIfOamCfmMip | |||
| 1.3.6.1.4.1.164.3.1.6.1.3.12.1 | TableethIfOamCfmMipTable | not-accessible | current | The Maintenance Entity Group Intermediate Point (MIP) table. MIP entities are defined under MD (Maintenance Domain Level). |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.1.1 | RowethIfOamCfmMipEntry | not-accessible | current | The MIP (per MD) table entry. |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.1.1.1 | ColumnethIfOamCfmMipMdIdx | not-accessible | current | The index to the Maintenance Domain (MD). See dot1agCfmMdIndex description in the IEEE8021-CFM-MIB. |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.1.1.2 | ColumnethIfOamCfmMipIdx | not-accessible | current | The index to the Maintenance Entity Group Intermediate Point (MIP) |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.1.1.3 | ColumnethIfOamCfmMipRowStatus | read-create | current | The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.1.1.4 | ColumnethIfOamCfmMipBoundedPortIfIndex | read-create | current | This object is the interface index of the interface to which the MIP is attached. If no such interface exists, then the variable is set to 0. |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.1.1.5 | ColumnethIfOamCfmMipFlowType | read-create | current | uni-directional indicates that the flow is defined from ingress port to egress, bi-directional indicates both flow parameters for ingress to egress and opposit… |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.1.1.6 | ColumnethIfOamCfmMipFlowRxIndex | read-create | current | The received flow for the MIP that holds the MIP 1 classification |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.1.1.7 | ColumnethIfOamCfmMipFlowTxIndex | read-create | current | The received flow for the MIP that holds the MIP 2 classification |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.2 | TableethIfOamCfmMhfTable | not-accessible | current | The MIP Half Function (MHF) table. The table defines MHF configuration, two MHF entities per MIP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.2.1 | RowethIfOamCfmMhfEntry | not-accessible | current | The MHF table entry |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.1 | ColumnethIfOamCfmMhfMdIdx | not-accessible | current | The index to the Maintenance Domain (MD). See description of the dot1agCfmMdIndex in the IEEE8021-CFM-MIB. |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.2 | ColumnethIfOamCfmMhfMipIdx | not-accessible | current | The index to the Maintenance Entity Group Intermediate Point (MIP) |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.3 | ColumnethIfOamCfmMhfIdx | not-accessible | current | The index to the MIP Half Function (MHF). |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.4 | ColumnethIfOamCfmMhfActive | read-write | current | A Boolean indicating the administrative state of the MHF. True indicates that the MHF is to function normally, and false that it is to cease functioning. |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.5 | ColumnethIfOamCfmMhfOutputPortIfIndex | read-write | current | This object is the interface index of the output interface of the MHF. If no such interface exists, then the variable is set to 0. |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.6 | ColumnethIfOamCfmMhfPrimaryVid | read-write | current | This object indicates the Primary VID of the MHF. The value 0 defines using of ethIfOamCfmMhfMappingProfile OBJECT belonging to this table (see below). |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.7 | ColumnethIfOamCfmMhfMappingProfile | read-write | current | This attribute defines the Mapping (Classification) profile (flowMappingProfileTable) assigned to this MHF. |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.8 | ColumnethIfOamCfmMhfCosMapping | read-write | current | This attribute defines MHF CoS mapping. The value 0..7 indicates fixed CoS selection. The value 255 defines use of ethIfOamCfmMhfCosMappingProfile OBJECT belon… |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.9 | ColumnethIfOamCfmMhfCosMappingProfile | read-write | current | The attribute contains cosInternalProfileIndex that defines CoS mapping profile assigned to this MHF, see cosInternalProfileTable. |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.10 | ColumnethIfOamCfmMhfQBlock | read-write | current | This attribute defines the QBlock assigned to this MHF. |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.11 | ColumnethIfOamCfmMhfFixedQueueMapping | read-write | current | This attribute defines the queue (cosProfileTable) that is assigned to the MHF. The value 255 defines using of ethIfOamCfmMhfQueueMappingProfile OBJECT belongi… |
| 1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.12 | ColumnethIfOamCfmMhfQueueMappingProfile | read-write | current | This attribute defines the queueMapping Profile (CosProfileTable) assigned to this MHF. |
| 1.3.6.1.4.1.164.3.1.6.1.3.13 | NodeethOamMip | |||
| 1.3.6.1.4.1.164.3.1.6.1.3.13.1 | TableethOamMipTable | not-accessible | current | The Maintenance Entity Group Intermediate Point (MIP) table. MIP entities are defined per port and VLAN. This table holds all the MIPs that were created. |
| 1.3.6.1.4.1.164.3.1.6.1.3.13.1.1 | RowethOamMipEntry | not-accessible | current | The MIP (per port and VLAN) table entry. |
| 1.3.6.1.4.1.164.3.1.6.1.3.13.1.1.1 | ColumnethOamMipIfIndex | not-accessible | current | The port index associated with this MIP port. |
| 1.3.6.1.4.1.164.3.1.6.1.3.13.1.1.2 | ColumnethOamMipVlanId | not-accessible | current | The VLAN-ID with which the MIP is associated on the interface. |
| 1.3.6.1.4.1.164.3.1.6.1.3.13.1.1.3 | ColumnethOamMipMdLevel | read-only | current | The MD level of the MIP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.13.2 | ScalaragnAutoMipAssign | read-write | current | Specifies the mode of creation of OAM MIP entity: auto(1) - If the MIP Policy (dot1agCfmMdMhfCreation) has a value that is different than None and if the condi… |
| 1.3.6.1.4.1.164.3.1.6.1.3.14 | IdentityethIfOamCfmSumMipMep | current | This object is used as an index in rowInfoTable to calculate the number of MEP and MIP entities. This OID object is referenced in rowInfoTableId. | |
| 1.3.6.1.4.1.164.3.1.6.1.3.15 | Tabledot1agXCfmMaNetTable | not-accessible | current | An extension to the standard Maintenance Association table, dot1agCfmMaNetTable |
| 1.3.6.1.4.1.164.3.1.6.1.3.15.1 | Rowdot1agXCfmMaNetEntry | not-accessible | current | The Maintenance Association table entry. |
| 1.3.6.1.4.1.164.3.1.6.1.3.15.1.1 | Columndot1agXCfmMaNetServiceIdName | read-only | current | This attribute specify the Service ID name of this MA. |
| 1.3.6.1.4.1.164.3.1.6.1.3.15.1.2 | Columndot1agXCfmMaNetIfStatusTlv | read-create | current | This object determines if Interface Status TLV is added in CCM message. |
| 1.3.6.1.4.1.164.3.1.6.1.3.16 | TableethOamMepFlowsTable | not-accessible | current | Multiple flows association to MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.16.1 | RowethOamMepFlowsEntry | not-accessible | current | Entry in this table represents flow association to MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.16.1.1 | ColumnethOamMepFlowType | not-accessible | current | Flow direction: uniDirectionalRx - flow toward the UNI (LAN)), uniDirectionalTx - flow toward the NNI (WAN)), bidirectional - two flows with same index, having… |
| 1.3.6.1.4.1.164.3.1.6.1.3.16.1.2 | ColumnethOamMepFlowIndex1 | not-accessible | current | Flow 1st index, equals to MEF-R flowTable flowIdx1 |
| 1.3.6.1.4.1.164.3.1.6.1.3.16.1.3 | ColumnethOamMepFlowIndex2 | not-accessible | current | Flow 2nd index, equals to MEF-R flowTable flowIdx2 |
| 1.3.6.1.4.1.164.3.1.6.1.3.16.1.4 | ColumnethOamMepFlowsRowStatus | read-create | current | This attribute allows to create/delete a row in this table. |
| 1.3.6.1.4.1.164.3.1.6.1.3.17 | TableethOamConfigTable | not-accessible | current | The purpose of this table is to enable the configuration of all per-Device OAM parameters. A single row is automatically created, and cannot be deleted. |
| 1.3.6.1.4.1.164.3.1.6.1.3.17.1 | RowethOamConfigEntry | not-accessible | current | An entry in this table includes parameters to be configured Per Device. |
| 1.3.6.1.4.1.164.3.1.6.1.3.17.1.1 | ColumnethOamConfigIdx | not-accessible | current | This index is equal to 1. |
| 1.3.6.1.4.1.164.3.1.6.1.3.17.1.2 | ColumnethOamConfigAlarmType | read-write | current | This object indicates alarm legacy report configuration. Legacy (1): Alarm name as defined in RAD OamCfm-MIB. SOAM (2): Alarm name as defined in IEEE 802.1ag t… |
| 1.3.6.1.4.1.164.3.1.6.1.3.17.1.3 | ColumnethOamConfigAvailabilityDeltaT | read-write | current | This object indicates the length of the small time interval for frame loss ratio calculation. |
| 1.3.6.1.4.1.164.3.1.6.1.3.17.1.4 | ColumnethOamConfigAvailabilityNumDeltaTs | read-write | current | This object indicates the number of consecutive small time intervals used to determine a change in the availability status as indicated by MEF 10.2.1. This par… |
| 1.3.6.1.4.1.164.3.1.6.1.3.17.1.5 | ColumnethOamConfigAvailabilityFwdFlrThreshold | read-write | current | This object indicates the Forward FLR threshold, in percentage, to be used in evaluating the availability/unavailability status of an availability indicator pe… |
| 1.3.6.1.4.1.164.3.1.6.1.3.17.1.6 | ColumnethOamConfigAvailabilityBckFlrThreshold | read-write | current | This object indicates the Backward FLR threshold, in percentage, to be used in evaluating the availability/unavailability status of an availability indicator p… |
| 1.3.6.1.4.1.164.3.1.6.1.3.17.1.7 | ColumnethOamConfigMdLevelMips | read-write | current | The global MIP/s that are configured for device services. When configured, a MIP shall be automatically defined at the specified MD level/s for all the service… |
| 1.3.6.1.4.1.164.3.1.6.1.3.18 | NodeethOamMepStats | |||
| 1.3.6.1.4.1.164.3.1.6.1.3.18.1 | TableethOamMepCurrentTable | not-accessible | current | Current interval statistics per local MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.1.1 | RowethOamMepCurrentEntry | not-accessible | current | An entry in this table includes current interval counters of local MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.1.1.1 | ColumnethOamMepCurrentCcmTx | read-only | current | Total number of CCM PDUs transmitted by local MEP in the current interval |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.2 | TableethOamMepIntervalTable | not-accessible | current | This table provides local MEP statistics for the history intervals. |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.2.1 | RowethOamMepIntervalEntry | not-accessible | current | An entry in this table is created by the agent for every ethOamMepCurrentEntry that completes its statistics interval duration. The contents of the current ent… |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.2.1.1 | ColumnethOamMepIntervalNumber | not-accessible | current | A number N, between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently com… |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.2.1.2 | ColumnethOamMepIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.2.1.3 | ColumnethOamMepIntervalDuration | read-only | current | The duration of this interval in seconds. |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.2.1.4 | ColumnethOamMepIntervalTimeStamp | read-only | current | The date and time of start of this interval. Time zone octets are not used (OCTET STRING (SIZE (8)). |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.2.1.5 | ColumnethOamMepIntervalCcmTx | read-only | current | Total number of CCM PDUs transmitted by Local MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.3 | TableethOamRMepStatsTable | not-accessible | current | Running statistics of remote MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.3.1 | RowethOamRMepStatsEntry | not-accessible | current | An entry in this table includes running counters for remote MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.3.1.1 | ColumnethOamRMepStatsRMepId | not-accessible | current | Remote MEP ID. |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.3.1.2 | ColumnethOamRMepStatsCcmRx | read-only | current | Total number of CCM PDUs received by the MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.3.1.3 | ColumnethOamRMepStatsClearCmd | read-write | current | A command that instructs the agent to clear running statistics of selected remote MEP. Setting this object to on(3), shall clear the per MEP statistics. Upon c… |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.4 | TableethOamRMepCurrentTable | not-accessible | current | Current interval statistics of remote MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.4.1 | RowethOamRMepCurrentEntry | not-accessible | current | An entry in this table includes current interval counters of remote MEP. |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.4.1.1 | ColumnethOamRMepCurrentCcmRx | read-only | current | Total number of CCM PDUs received by remote MEP in the current interval. |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.5 | TableethOamRMepIntervalTable | not-accessible | current | This table provides per remote MEP statistics for the history intervals. |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.5.1 | RowethOamRMepIntervalEntry | not-accessible | current | An entry in this table is created by the agent for every ethOamRMepCurrentEntry that completes its statistics interval duration. The contents of the current en… |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.5.1.1 | ColumnethOamRMepIntervalNumber | not-accessible | current | A number N, between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently com… |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.5.1.2 | ColumnethOamRMepIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.5.1.3 | ColumnethOamRMepIntervalDuration | read-only | current | The duration of this interval in seconds. |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.5.1.4 | ColumnethOamRMepIntervalTimeStamp | read-only | current | The date and time of start of this interval. (time stamp) Time zone octets are not used (OCTET STRING (SIZE (8)). |
| 1.3.6.1.4.1.164.3.1.6.1.3.18.5.1.5 | ColumnethOamRMepIntervalCcmRx | read-only | current | Total number of CCM PDUs received by Remote MEP. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EthOamBinCounterType | INTEGER { rtDelay (1), rtDelayVar (2), fwDelay(3), fwDelayVar(4), bwDelay(5), bwDelayVar(6) } | current | Type of OAM BIN Measurements counter, e.g Round Trip Frame Delay Round Trip Frame Delay Variation Forward Frame Delay Forward Frame Delay Variation Backward Frame Delay Backward Frame Delay Variation |