CM-SAT-MIB
136 objects
This module defines the Service Activation MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Imported Objects
| ADVA-MIB | fsp150cm |
| CM-COMMON-MIB | AdminState CmPmBinAction MepDestinationType OperationalState SecondaryState VlanId VlanPriority |
| CM-ENTITY-MIB | neIndex networkElementEntry shelfIndex slotIndex |
| CM-FACILITY-MIB | PolicerColorMode |
| CM-SA-MIB | EsaProbePktIntervalType |
| IEEE8021-CFM-MIB | dot1agCfmMepEntry Dot1agCfmMepIdOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus StorageType TEXTUAL-CONVENTION TruthValue VariablePointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.1.12.28 | IdentitycmServiceActivationMIB | This module defines the Service Activation MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. | ||
| 1.3.6.1.4.1.2544.1.12.28.1 | NodecmServActivationObjects | |||
| 1.3.6.1.4.1.2544.1.12.28.1.1 | TablesatControlTable | not-accessible | current | A list of entries for the control of SAT Control. |
| 1.3.6.1.4.1.2544.1.12.28.1.1.1 | RowsatControlEntry | not-accessible | current | A conceptual row in the satControlTable. |
| 1.3.6.1.4.1.2544.1.12.28.1.1.1.1 | ColumnsatControlIndex | not-accessible | current | The index of the Service Activation Test. |
| 1.3.6.1.4.1.2544.1.12.28.1.1.1.2 | ColumnsatControlName | read-write | current | The alias of the Service Activation Test. |
| 1.3.6.1.4.1.2544.1.12.28.1.1.1.3 | ColumnsatControlTestMode | read-write | current | The mode of the Service Activation Test. |
| 1.3.6.1.4.1.2544.1.12.28.1.1.1.4 | ColumnsatControlTestProcedures | read-write | current | A List of Service Activation Test procedures. |
| 1.3.6.1.4.1.2544.1.12.28.1.1.1.5 | ColumnsatControlConfigTestDuration | read-write | current | The duration of CIR step test, expressed in seconds. |
| 1.3.6.1.4.1.2544.1.12.28.1.1.1.6 | ColumnsatControlConfigCIRTestStepNum | read-write | current | The number of steps in CIR step test. |
| 1.3.6.1.4.1.2544.1.12.28.1.1.1.7 | ColumnsatControlConfigCIRTestStepDuration | read-write | current | The duration of each CIR step test. |
| 1.3.6.1.4.1.2544.1.12.28.1.1.1.8 | ColumnsatControlPerfTestDuration | read-write | current | The duration of the SAT Performance Test, expressed in minutes. |
| 1.3.6.1.4.1.2544.1.12.28.1.1.1.9 | ColumnsatControlStatus | read-only | current | The overall SAT Control Test Status. |
| 1.3.6.1.4.1.2544.1.12.28.1.1.1.10 | ColumnsatControlAction | read-write | current | The start/stop action of the SAT Control. |
| 1.3.6.1.4.1.2544.1.12.28.1.1.1.11 | ColumnsatControlStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.28.1.1.1.12 | ColumnsatControlRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.28.1.1.1.13 | ColumnsatControlFailCause | read-only | current | The information about the reason of the Test failure. |
| 1.3.6.1.4.1.2544.1.12.28.1.1.1.14 | ColumnsatControlTestStartTime | read-only | current | The start time of this SAT Control. |
| 1.3.6.1.4.1.2544.1.12.28.1.1.1.15 | ColumnsatControlFlpduTagOverride | read-write | current | Whether permit user to configure FLPDU explicitly. Disabled: FLPDUs tag is inherited from SCM of MEP. Enabled: User can configure FLPDUs tag explicitly, which … |
| 1.3.6.1.4.1.2544.1.12.28.1.2 | TablesatStreamTable | not-accessible | current | A list of entries for the control of SAT Streams. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1 | RowsatStreamEntry | not-accessible | current | A conceptual row in the satStreamTable. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.1 | ColumnsatStreamIndex | not-accessible | current | The index of the Service Activation Test Stream. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.2 | ColumnsatStreamName | read-write | current | The alias of the Service Activation Test Stream. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.3 | ColumnsatStreamTestPort | read-write | current | The related port of the Service Activation Test Stream. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.4 | ColumnsatStreamTestDirection | read-write | current | The direction of the Service Activation Test Stream. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.5 | ColumnsatStreamDestMacAddress | read-write | current | This object describes the destination MAC address of FLPDU. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.6 | ColumnsatStreamFramePayloadType | read-write | current | The type of Payload of the Frame Loss PDU. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.7 | ColumnsatStreamCustomFramePayload | read-write | current | This object describes the customized frame payload. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.8 | ColumnsatStreamFrameSizeList | read-write | current | This object describes a list of Frame Sizes used in FLPDU. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.9 | ColumnsatStreamSacProfileId | read-write | current | This object describes the related Service Acceptance Criteria (SAC) Profile Id. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.10 | ColumnsatStreamSrcMepId | read-write | current | This object describes the Local MEP related with SAT Test Stream. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.11 | ColumnsatStreamDestMepType | read-write | current | This object describes the type of Destination MEP, which can be based on MEP id or MAC Address. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.12 | ColumnsatStreamDestMepId | read-write | current | This object describes the destination MEP id. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.13 | ColumnsatStreamDestMepMacAddr | read-write | current | This object describes the Destination MEP's MAC Address. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.14 | ColumnsatStreamDmmPacketSize | read-write | current | This object describes the Delay Measurement Message (DMM) frame size. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.15 | ColumnsatStreamDmmPacketInterval | read-write | current | This object describes the Delay Measurement Message (DMM) frame generation interval. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.16 | ColumnsatStreamOverallResult | read-only | current | This object describes the test result. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.17 | ColumnsatStreamAction | read-write | current | This object describes the operation on this test. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.18 | ColumnsatStreamStatus | read-only | current | This object describes the test status of this Test Stream. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.19 | ColumnsatStreamCurrentTestProcedure | read-only | current | This object describes the current test procedure. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.20 | ColumnsatStreamCurrentConfigCirTestStep | read-only | current | This object describes the current step number of CIR Test. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.21 | ColumnsatStreamInner1VlanId | read-write | current | This object describes the Inner1 VLAN Id. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.22 | ColumnsatStreamInner1VlanPri | read-write | current | This object describes the Inner1 VLAN Priority. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.23 | ColumnsatStreamInner1VlanEnabled | read-write | current | This object describes whether the Inner1 VLAN enabled. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.24 | ColumnsatStreamInner1ValnEtherType | read-write | current | This object describes the Inner2 VLAN EtherType. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.25 | ColumnsatStreamInner2VlanId | read-write | current | This object describes the Inner2 VLAN Id. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.26 | ColumnsatStreamInner2VlanPri | read-write | current | This object describes the Inner2 VLAN Priority. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.27 | ColumnsatStreamInner2VlanEnabled | read-write | current | This object describes whether the Inner2 VLAN enabled. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.28 | ColumnsatStreamInner2VlanEtherType | read-write | current | This object describes whether the Inner2 VLAN ether type. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.29 | ColumnsatStreamOuterVlanId | read-write | current | This object describes the Outer VLAN Id. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.30 | ColumnsatStreamOuterVlanPri | read-write | current | This object describes the Outer VLAN Priority. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.31 | ColumnsatStreamOuterVlanEnabled | read-write | current | This object describes whether the Outer VLAN enabled. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.32 | ColumnsatStreamOuterVlanEtherType | read-write | current | This object describes whether the Outer VLAN Ethertype. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.33 | ColumnsatStreamDeiEnabled | read-write | current | This object describes whether the DEI enabled. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.34 | ColumnsatStreamGreenPcp | read-write | current | This object describes the PCP value for Green Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.35 | ColumnsatStreamYellowPcp | read-write | current | This object describes the PCP value for Yellow Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.36 | ColumnsatStreamColorMode | read-write | current | This object describes the color mode for Policing test. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.37 | ColumnsatStreamCirLo | read-write | current | This object describes CIR low 32 bits. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.38 | ColumnsatStreamCirHi | read-write | current | This object describes CIR high 32 bits. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.39 | ColumnsatStreamEirLo | read-write | current | This object describes EIR low 32 bits. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.40 | ColumnsatStreamEirHi | read-write | current | This object describes EIR high 32 bits. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.41 | ColumnsatStreamCbs | read-write | current | This object describes CBS. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.42 | ColumnsatStreamEbs | read-write | current | This object describes CBS. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.43 | ColumnsatStreamStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.44 | ColumnsatStreamRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.45 | ColumnsatStreamDmmPktPriority | read-write | current | This object describes the Dmm packet priority. |
| 1.3.6.1.4.1.2544.1.12.28.1.2.1.46 | ColumnsatStreamMFactor | read-write | current | The M factor is used in test result validation. It is added to allow for the effect of the traffic policer's CBS and EBS settings and test time. Roughly, it eq… |
| 1.3.6.1.4.1.2544.1.12.28.1.3 | TablesatResultStatsTable | not-accessible | current | A list of entries for the control of SAT Result Statistics. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1 | RowsatResultStatsEntry | not-accessible | current | A conceptual row in the satResultStatsTable. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.1 | ColumnsatResultStatsTestType | not-accessible | current | The Test Type of the Service Activation Test. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.2 | ColumnsatResultStatsStepNumber | not-accessible | current | The Test step number of the Service Activation Test. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.3 | ColumnsatResultStatsSessionId | read-only | current | The session id of the Service Activation Test. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.4 | ColumnsatResultStatsStartTime | read-only | current | The start time of the Service Activation Test. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.5 | ColumnsatResultStatsEndTime | read-only | current | The end time of the Service Activation Test. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.6 | ColumnsatResultStatsStatus | read-only | current | The Status of the Service Activation Test. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.7 | ColumnsatResultStatsResult | read-only | current | This object describes SAT whether pass. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.8 | ColumnsatResultStatsMinIRGMeasured | read-only | current | This object describes the minimum Information Rate (IR) for Green Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.9 | ColumnsatResultStatsAvgIRGMeasured | read-only | current | This object describes the average Information Rate (IR) for Green Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.10 | ColumnsatResultStatsMaxIRGMeasured | read-only | current | This object describes the maximum Information Rate (IR) for Green Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.11 | ColumnsatResultStatsMinIRYMeasured | read-only | current | This object describes the minimum Information Rate (IR) for Yellow Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.12 | ColumnsatResultStatsAvgIRYMeasured | read-only | current | This object describes the average Information Rate (IR) for Yellow Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.13 | ColumnsatResultStatsMaxIRYMeasured | read-only | current | This object describes the maximum Information Rate (IR) for Yellow Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.14 | ColumnsatResultStatsFlrGMeasured | read-only | current | This object describes the Frame Loss Ratio (FLR) for Green Packets. From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost. Fo… |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.15 | ColumnsatResultStatsFlrYMeasured | read-only | current | This object describes the Frame Loss Ratio (FLR) for Yellow Packets. From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost. F… |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.16 | ColumnsatResultStatsFlrGCounts | read-only | current | This object describes the Frame Loss (FL) count for Green Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.17 | ColumnsatResultStatsFlrYCounts | read-only | current | This object describes the Frame Loss (FL) count for Yellow Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.18 | ColumnsatResultStatsMinFTDGMeasured | read-only | current | This object describes the minimum Frame Transfer Delay (FTD) for Green Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.19 | ColumnsatResultStatsAvgFTDGMeasured | read-only | current | This object describes the average Frame Transfer Delay (FTD) for Green Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.20 | ColumnsatResultStatsMaxFTDGMeasured | read-only | current | This object describes the maximum Frame Transfer Delay (FTD) for Green Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.21 | ColumnsatResultStatsIMinFDVGMeasured | read-only | current | This object describes the minimum Frame Delay Variation (FDV) for Green Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.22 | ColumnsatResultStatsIAvgFDVGMeasured | read-only | current | This object describes the average Frame Delay Variation (FDV) for Green Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.23 | ColumnsatResultStatsIMaxFDVGMeasured | read-only | current | This object describes the maximum Frame Delay Variation (FDV) for Green Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.24 | ColumnsatResultStatsISyncErrorsNum | read-only | current | The number of (time) Synchronization Errors between SAT Control and SAT Responder in the current Test. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.25 | ColumnsatResultStatsIfNegFLG | read-only | current | This object means whether negative green frame loss. True: negative loss of green packets occurs, which means receiving more green packets than expected. False… |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.26 | ColumnsatResultStatsIfNegFLY | read-only | current | This object means whether negative yellow frame loss. True: negative loss of yellow packets occurs, which means receiving more yellow packets than expected. Fa… |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.27 | ColumnsatResultStatsAvgIRT | read-only | current | This object describes Average IR of total packets, non distinguishing green or yellow. Only valid for color blind test. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.28 | ColumnsatResultStatsFlrTMeasured | read-only | current | This object describes the Frame Loss Ratio (FLR) for Total Packets. No distinguish color, negative value means receiving much more packets than expected. Only … |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.29 | ColumnsatResultStatsFlTCounts | read-only | current | This object describes the Frame Loss (FL) count for Total Packets. |
| 1.3.6.1.4.1.2544.1.12.28.1.3.1.30 | ColumnsatResultStatsIfNegFLT | read-only | current | This object means whether negative total frame loss. True: negative loss of green packets occurs, which means receiving more green packets than expected. False… |
| 1.3.6.1.4.1.2544.1.12.28.1.4 | TablesatSacProfileTable | not-accessible | current | A list of entries for the control of SAT Service Acceptance Criteria (SAC) Profile. |
| 1.3.6.1.4.1.2544.1.12.28.1.4.1 | RowsatSacProfileEntry | not-accessible | current | A conceptual row in the satSacProfileTable. |
| 1.3.6.1.4.1.2544.1.12.28.1.4.1.1 | ColumnsatSacProfileIndex | not-accessible | current | The index of SAT Service Acceptance Criteria (SAC) Profile. |
| 1.3.6.1.4.1.2544.1.12.28.1.4.1.2 | ColumnsatSacProfileAlias | read-write | current | The alias of SAT Service Acceptance Criteria (SAC) Profile. |
| 1.3.6.1.4.1.2544.1.12.28.1.4.1.3 | ColumnsatSacProfileFLR | read-write | current | The Frame Loss Ratio (FLR) acceptance criteria of this SAC Profile. From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost. Fo… |
| 1.3.6.1.4.1.2544.1.12.28.1.4.1.4 | ColumnsatSacProfileFTD | read-write | current | The Frame Transfer Delay (FTD) acceptance criteria of this SAC Profile. |
| 1.3.6.1.4.1.2544.1.12.28.1.4.1.5 | ColumnsatSacProfileFDV | read-write | current | The frame transfer delay variation of SAT Service Acceptance Criteria (SAC) Profile. |
| 1.3.6.1.4.1.2544.1.12.28.1.4.1.6 | ColumnsatSacProfileStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.28.1.4.1.7 | ColumnsatSacProfileRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.28.1.5 | TablesatResponderSessionTable | not-accessible | current | A list of entries for the control of SAT Responder Session. |
| 1.3.6.1.4.1.2544.1.12.28.1.5.1 | RowsatResponderSessionEntry | not-accessible | current | A conceptual row in the satResponderSessionTable. |
| 1.3.6.1.4.1.2544.1.12.28.1.5.1.1 | ColumnsatResponderSessionIndex | not-accessible | current | The index of the entry. |
| 1.3.6.1.4.1.2544.1.12.28.1.5.1.2 | ColumnsatResponderSessionId | read-only | current | The id of active test session negotiated between SAT Responder and SAT Control. |
| 1.3.6.1.4.1.2544.1.12.28.1.5.1.3 | ColumnsatResponderSessionControlMepMacAddr | read-only | current | This object describes the Control MEP's MAC Address. |
| 1.3.6.1.4.1.2544.1.12.28.1.5.1.4 | ColumnsatResponderSessionMepId | read-only | current | The local MEP Id. |
| 1.3.6.1.4.1.2544.1.12.28.1.5.1.5 | ColumnsatResponderSessionStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.28.1.5.1.6 | ColumnsatResponderSessionRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.28.1.6 | TablenetworkElementSatParamsTable | not-accessible | current | Entries may be auto discovered, or can be explicitly created by SNMP Manager. Each remotely discovered shelf is represented as a row in this table. |
| 1.3.6.1.4.1.2544.1.12.28.1.6.1 | RownetworkElementSatParamsEntry | not-accessible | current | A conceptual row in the networkElementSatParamsTable. |
| 1.3.6.1.4.1.2544.1.12.28.1.6.1.1 | ColumnneSatParamsEtherType | read-write | current | This object describes the SAT System EtherType. |
| 1.3.6.1.4.1.2544.1.12.28.1.7 | TablesatCfmMepExtTable | not-accessible | current | This objects describe the SAT responder whether enabled on the MEP. |
| 1.3.6.1.4.1.2544.1.12.28.1.7.1 | RowsatCfmMepExtEntry | not-accessible | current | A conceptual row in the satCfmMepExtTable. |
| 1.3.6.1.4.1.2544.1.12.28.1.7.1.1 | ColumnsatCfmMepSatResponderEnabled | read-write | current | This objects describes the SAT Responder whether enabled on the MEP. |
| 1.3.6.1.4.1.2544.1.12.28.2 | NodecmServActivationNotifications | |||
| 1.3.6.1.4.1.2544.1.12.28.3 | NodecmServActivationConformance | |||
| 1.3.6.1.4.1.2544.1.12.28.3.1 | NodecmServActivationCompliances | |||
| 1.3.6.1.4.1.2544.1.12.28.3.1.1 | CompliancecmServActivationCompliance | current | Describes the requirements for conformance to the CM SAT group. | |
| 1.3.6.1.4.1.2544.1.12.28.3.2 | NodecmServActivationGroups | |||
| 1.3.6.1.4.1.2544.1.12.28.3.2.1 | GroupcmSatGroup | current | A collection of objects used to manage the CM SAT functionality. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SatDirection | INTEGER { forward(1), backward(2) } | current | The direction of Service Activation Test. |
| SatFramePayloadType | INTEGER { prbs31(1), custom(2) } | current | This object describes the Payload type of Service Activation Test frame. |
| SatProceduresList | BITS { configTestCir(1), configTestEir(2), configTestCbs(3), configTestEbs(4), configTestPolicing(5), performance(6) } | current | Bit Mask that specifies all the Service Activation Test procedure. |
| SatProceduresType | INTEGER { none(1), configTestCir(2), configTestEir(3), configTestCbs(4), configTestEbs(5), configTestPolicing(6), performanceTest(7) } | current | All procedures type of the Service Activation Test. |
| SatResult | INTEGER { none(1), pass(2), fail(3) } | current | This object describes the result of Service Activation Test. |
| SatStatus | INTEGER { completed(1), notStarted(2), inProgress(3), failed(4) } | current | The status of the overall Service Activation Test. |
| SatTestAction | INTEGER { start(1), stop(2), notApplicable(3) } | current | This object describes the operation on Service Activation Test frame Payload type. |
| ServiceActivationTestMode | INTEGER { oneWay(1), twoWay(2) } | current | The test mode of Service Activation Test. |